MKP385 Vishay, MKP385 Datasheet - Page 6
![no-image](/images/manufacturer_photos/0/6/697/vishay_sml.jpg)
MKP385
Manufacturer Part Number
MKP385
Description
Ac And Pulse Metallized Polypropylene Film Capacitors Mkp Radial Potted Type
Manufacturer
Vishay
Datasheet
1.MKP385.pdf
(15 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MKP385427160JKM2T0
Manufacturer:
VISHAY/威世
Quantity:
20 000
MKP 385
Vishay BCcomponents
MOUNTING
Normal use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting on printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board. The capacitors shall be mechanically fixed by the leads.
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
•
• Product height with seating plane as given by “IEC 60717” as reference: h
Storage Temperature
•
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com
164
Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
Storage temperature: T
stg
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
AC and Pulse Metallized Polypropylene Film Capacitors
Eccentricity
For technical questions, contact: dc-film@vishay.com
I
max.
MKP Radial Potted Type
= I + 0.3 mm
b
max.
max.
= b + 0.3 mm
≤ h + 0.3 mm.
Document Number: 28152
Revision: 13-Oct-08