IRS2336D International Rectifier Corp., IRS2336D Datasheet - Page 16

• Manufacturer Part Number: IRS2336D
• Description: High Voltage 3 Phase Gate Driver Ic
• Manufacturer: International Rectifier Corp.

Lead Definitions: IRS23364D
FAULT/N
www.irf.com
Symbol
ITRIP
RCIN
HIN1
HIN2
HIN3
COM
VCC
LIN1
LIN2
LIN3
HO1
HO2
HO3
VSS
VB1
VB2
VB3
VS1
VS2
VS3
LO1
LO2
LO3
EN
Logic input to shutdown functionality. Logic functions when EN is high (i.e., positive logic). No
effect on FAULT and not latched.
An external RC network input used to define the FAULT CLEAR delay (t
equal to R*C. When RCIN > 8 V, the FAULT pin goes back into an open-drain high-impedance
state.
Low-side supply voltage
Logic ground
High-side gate drive floating supply (phase 1)
High-side gate drive floating supply (phase 2)
High-side gate drive floating supply (phase 3)
High voltage floating supply return (phase 1)
High voltage floating supply return (phase 2)
High voltage floating supply return (phase 3)
Logic inputs for high-side gate driver outputs (phase 1); input is in-phase with output
Logic inputs for high-side gate driver outputs (phase 2); input is in-phase with output
Logic inputs for high-side gate driver outputs (phase 3); input is in-phase with output
Logic inputs for low-side gate driver outputs (phase 1); input is in-phase with output
Logic inputs for low-side gate driver outputs (phase 2); input is in-phase with output
Logic inputs for low-side gate driver outputs (phase 3); input is in-phase with output
High-side driver outputs (phase 1)
High-side driver outputs (phase 2)
High-side driver outputs (phase 3)
Low-side driver outputs (phase 1)
Low-side driver outputs (phase 2)
Low-side driver outputs (phase 3)
Low-side gate drive return
Indicates over-current, over-temperature (ITRIP), or low-side undervoltage lockout has occurred.
This pin has negative logic and an open-drain output. The use of over-current and over-
temperature protection requires the use of external components.
Analog input for over-current shutdown. When active, ITRIP shuts down outputs and activates
FAULT and RCIN low. When ITRIP becomes inactive, FAULT stays active low for an externally
set time t
FLTCLR
, then automatically becomes inactive (open-drain high impedance).
16
Description
IRS2336xD Family
FLTCLR
© 2008 International Rectifier
) approximately