130MR2C HB Electronic Components, 130MR2C Datasheet - Page 8

• Manufacturer Part Number: 130MR2C
• Description: Led Specification
• Manufacturer: HB Electronic Components

yLEAD STRENGTH
1) Bend strength
2) Tensile strength (@Room Temperature)
yHANDLING PRECAUTIONS
Although rigid against vibration, the LEDs may damaged or scratched if dropped. So take care
when handling.
yCHEMICAL RESISTANCE
1) Avoid exposure to chemicals as it may attack the LED surface and cause discoloration.
2) When washing is required, refer to the following table for the proper chemical to be sued.
Trichloroethylene
Isopropyl Alcohol
--Usable
Do not bend the lead more than twice. (Fig.9)
If the force is 1kg or less, there will be no problem. (Fig.10)
(Immersion time: within 3 minutes at room temperature.)
Chlorothene
SOLVENT
Freon TE
Acetone
Thinner
--Do not use.
Fig.9
ADAPTABILITY
2.
Fig.10
.J
LED LAMP APPLICATION
NOTE: Influences of ultrasonic cleaning of the LED
Therefore, ultrasonic cleaning should only be
performed after confirming there is no problem by
conducting a test under practical.
resin body differ depending on such factors
as the oscillator output, size of the PC board
and the way in which the LED is mounted.
Page : 8