at75c220 ATMEL Corporation, at75c220 Datasheet - Page 77
at75c220
Manufacturer Part Number
at75c220
Description
Smart Internet Appliance Processor Siap
Manufacturer
ATMEL Corporation
Datasheet
1.AT75C220.pdf
(144 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
- Current page: 77 of 144
- Download datasheet (2Mb)
Receiver
Asynchronous Receiver
The USART is configured for asynchronous operation
when SYNC = 0 (bit 7 of US_MR). In asynchronous mode,
the USART detects the start of a received character by
sampling the RXD signal until it detects a valid start bit. A
low level (space) on RXD is interpreted as a valid start bit if
it is detected for more than seven cycles of the sampling
clock, which is 16 times the baud rate. Hence, a space
which is longer than 7/16 of the bit period is detected as a
valid start bit. A space which is 7/16 of a bit period or
Figure 17. Asynchronous Mode: Start Bit Detection
Figure 18. Asynchronous Mode: Character Reception
Synchronous Receiver
When configured for synchronous operation (SYNC = 1),
the receiver samples the RXD signal on each rising edge of
the baud rate clock. If a low level is detected, it is consid-
ered as a start. Data bits, parity bit and stop bit are sam-
pled and the receiver waits for the next start bit. See the
example in Figure 19.
Receiver Ready
When a complete character is received, it is transferred to
the US_RHR and the RXRDY status bit in US_CSR is set.
If US_RHR has not been read since the last transfer, the
OVRE status bit in US_CSR is set.
Rate Clock
16 x Baud
Sampling
Example: 8-bit, parity enabled 1 stop
Sampling
RXD
RXD
periods
0.5-bit
True Start Detection
period
1-bit
D0
D1
True Start
Detection
D2
D3
shorter is ignored and the receiver continues to wait for a
valid start bit.
When a valid start bit has been detected, the receiver sam-
ples the RXD at the theoretical mid-point of each bit. It is
assumed that each bit lasts 16 cycles of the sampling clock
(1-bit period) so the sampling point is eight cycles (0.5-bit
periods) after the start of the bit. The first sampling point is
therefore 24 cycles (1.5-bit periods) after the falling edge of
the start bit was detected. Each subsequent bit is sampled
16 cycles (1-bit period) after the previous one.
Parity Error
Each time a character is received, the receiver calculates
the parity of the received data bits in accordance with the
field PAR in US_MR. It then compares the result with the
received parity bit. If different, the parity error bit PARE in
US_CSR is set.
Framing Error
If a character is received with a stop bit at low level and
with at least one data bit at high level, a framing error is
generated. This sets FRAME in US_CSR.
D4
D5
D6
D7
Parity Bit
Stop Bit
D0
77
Related parts for at75c220
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
INTERVAL AND WIPE/WASH WIPER CONTROL IC WITH DELAY
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
Low-Voltage Voice-Switched IC for Hands-Free Operation
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
MONOLITHIC INTEGRATED FEATUREPHONE CIRCUIT
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
AM-FM Receiver IC U4255BM-M
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
Monolithic Integrated Feature Phone Circuit
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
Multistandard Video-IF and Quasi Parallel Sound Processing
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
High-performance EE PLD
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
8-bit Flash Microcontroller
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
2-Wire Serial EEPROM
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
U6046BREAR WINDOW HEATING TIMER / LONG-TERM TIMER
Manufacturer:
ATMEL Corporation
Datasheet: