tmp88ph40mg TOSHIBA Semiconductor CORPORATION, tmp88ph40mg Datasheet - Page 25

• Manufacturer Part Number: tmp88ph40mg
• Description: 8 Bit Microcontroller
• Manufacturer: TOSHIBA Semiconductor CORPORATION

rupt master enable flag (IMF).
case the device is immediately reset as is normally reset by
ating from NORMAL mode.
The device can be released from IDLE mode normally or by an interrupt as selected with the inter-
The device can also be released from IDLE mode by pulling the
Note: If a watchdog timer interrupt occurs immediately before entering IDLE mode, the device pro-
a. Released normally (when IMF = 0)
b. Released by interrupt (when IMF = 1)
rupt individual enable flag (EF), and restarts execution beginning with the instruction next to
one that placed it in IDLE mode. The interrupt latch (IL) for the interrupt source used to exit
IDLE mode normally needs to be cleared to 0 using a load instruction.
rupt individual enable flag (EF), and enters interrupt handling. After interrupt handling, the
device returns to the instruction next to one that placed it in IDLE mode.
cesses the watchdog timer interrupt without entering IDLE mode.
The device can be released from IDLE mode by the interrupt source enabled by the inter-
The device can be released from IDLE mode by the interrupt source enabled by the inter-
Page 15
RESET
. After reset, the device starts oper-
RESET
pin input low, in which
TMP88PH40MG