0819-0010 EnerSys, 0819-0010 Datasheet - Page 6
![BATT CYCLON SLA 4V 2.5AH](/photos/0/13/1350/0819-0010_sml.jpg)
0819-0010
Manufacturer Part Number
0819-0010
Description
BATT CYCLON SLA 4V 2.5AH
Manufacturer
EnerSys
Series
Cyclon®r
Type
Sealed Lead Acid Batteriesr
Specifications of 0819-0010
Voltage - Rated
4V
Capacity
2.5Ah
Size / Dimension
3.13" Dia x 1.81" H (79.5mm x 46.0mm)
Termination Style
Spade, .187" (4.7mm)
Rechargeability
Yes
Weight
0.05 lb (22.68g)
Output Voltage
4 V
Chemistry
Lead Acid
Rechargeable/non-rechargeable
Rechargeable
Battery Capacity
25 Ah
Lead Free Status / RoHS Status
Lead free by exemption / RoHS compliant by exemption
Other names
842-1006
6
Chapter 1:
Introducing the Genesis Battery
1.1 Introduction
The purpose of this guide is to describe the characteristics
of the sealed-lead family of rechargeable CYCLON
cells and batteries from EnerSys
applications. The unique cylindrical design overcomes
many limitations of competitive lead-acid systems without
sacrificing cost effectiveness, reliability, ruggedness and
long life which have always been assets of the lead-acid
battery. Some of the features are described below.
1.2 Sealed Design
Individual cells and monobloc batteries are sealed to
prevent electrolyte leakage. Since the cell operates during
its normal life without loss of water, even during continuous
overcharge, no water or electrolyte checks are required.
Because of the sealed design, the cell, monobloc or battery
assembly can be oriented in any position for ease of
installation. In addition, the combination of a sealed
design and a mechanically operated resealable Bunsen
valve allows the cell to be operated even in a vacuum.
1.3 Low Temperature Performance
The exceptional low temperature performance of CYCLON
batteries have been made possible by the use of plates
that provide a high surface area, coupled with a separator
system that minimizes diffusion and resistance effects. This
results in good utilization of active material and excellent
voltage regulation over a wide temperature range.
1.4 High Rate Charge & Discharge Capabilities
The thin plate construction of CYCLON batteries contribute
to high utilization of the active plate materials and very
low internal impedance. This means that the cells can
be discharged at high rates, allowing the use of smaller
batteries for short duration, high rate discharges. Another
advantage of the very low internal resistance is the fast
recharge capability. Depending on the depth of discharge
and charge current available, the CYCLON battery cell can
be fully charged in a few hours.
1.5 Long Life in Float Applications
The high purity of the lead-tin grid (the purity of the lead
is in excess of 99.99%) used in CYCLON battery cells
results in long life on float charge. Depending on the
ambient temperature and the specific product (single cell
or monobloc) selected, one can get up to ten (10) years
float life.
www.enersys.com
Chapter 1:
Introducing CYCLON
®
®
Batteries
in its many different
®
1.6 Structural Resistance
The rugged outer metal case of the single cell design
increases its resistance to shock, crushing or damage due
to dropping, while allowing a very high vent pressure of
50 pounds per square inch (psi) or about 3.4 atmospheres
(atm). The cylindrical shape of the monobloc case also
allows the highest plastic case vent pressure of 8 psi (0.54
atm), as well as providing resistance to case distortion due
to heat.
1.7 Packing Flexibility
All CYCLON battery single cells can be used in parallel for
additional capacity. The individual cell construction allows
the battery to be laid out inside a battery cavity in an almost
infinite variety of patterns, maximizing space utilization. Heat
sealed combinations of the monoblocs add to the flexibility
of mounting configurations as well as contributing to savings
in space requirements.
1.8 High Power Density
CYCLON batteries have very high power density, particularly
at high rates of discharge. Please refer to Appendix A for
several graphs and charts that detail these capabilities.
1.9 Transportation Classification
The Department of Transportation (DOT) has classified all
CYCLON batteries as “nonspillable wet electric storage
batteries.” Having been tested and found in compliance
with section 173.159 (d) of the 49 CFR, subchapter 173.159,
CYCLON batteries are exempt and unregulated regarding
shipping requirements of DOT 173.159. As a result,
CYCLON
number, nor do they require additional DOT
hazard-communication labeling or placarding.
CYCLON
transportation without restriction.
CYCLON batteries and their outside shipping container
must be labeled “nonspillable” or “nonspillable battery.”
This labeling requirement is to clarify and distinguish to
shippers and transporters that all batteries have been
tested and determined to be in compliance with DOT
HMR 49 Non-Hazardous Materials, and International Civil
Aeronautics Organization (ICAO) and International Air
Transport (IATA) Packaging Instruction 806 and Special
Provision A67 Vibration and Pressure Differential Tests,
and are therefore unregulated and classified as
“nonspillable wet electric storage battery.”
®
®
batteries do not have an assigned UN
batteries may be shipped by air or ground
Publication No: US-CYC-AM-007 - April 2008