KITPF0100EPEVBE Freescale Semiconductor, KITPF0100EPEVBE Datasheet - Page 14

• Manufacturer Part Number: KITPF0100EPEVBE
• Description: Power Management IC Development Tools MMPF0100 Eval Boar
• Manufacturer: Freescale Semiconductor
• Type: PMIC Solutionsr

Specifications of KITPF0100EPEVBE

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: PF0100
• Input Voltage: 3.1 V to 4.5 V
• Output Voltage: 3.1 V to 4.5 V
• Description/function: Evaluation Board
• Interface Type: USB
• Output Current: 3 A to 5 A
• For Use With: PF0100

Hardware Configuration
14
Connect the power supply and the USB communication cables as shown in
it are recommended in order to accurately verify that each one of the output supplies is providing the correct
voltage level.
Note: The KITPF0100EPEVBE allows the selection of SW2 regulator output or an external 3.3V LDO output as
the VDDIO/I
SW2 regulator is to be set below 3.0V then make sure the 3.3V LDO output is connected to VDDIO and the I
pull-up resistors by removing R34 and R33 and shorting pins 1, 2 and 3 of J30.
2
C pull-up supply. By default, the SW2 regulator is the source for the VDDIO supply (J30 = 3-2). If the
Figure 10. Evaluation Board Setup
KTPF0100UG, Rev. 2.0
Figure
10. Voltmeters are optional but
Freescale Semiconductor
2
C