KITPF0100EPEVBE Freescale Semiconductor, KITPF0100EPEVBE Datasheet - Page 48

• Manufacturer Part Number: KITPF0100EPEVBE
• Description: Power Management IC Development Tools MMPF0100 Eval Boar
• Manufacturer: Freescale Semiconductor
• Type: PMIC Solutionsr

Specifications of KITPF0100EPEVBE

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: PF0100
• Input Voltage: 3.1 V to 4.5 V
• Output Voltage: 3.1 V to 4.5 V
• Description/function: Evaluation Board
• Interface Type: USB
• Output Current: 3 A to 5 A
• For Use With: PF0100

Graphical User Interface Description
48
VREFDDR:OFF
VSNVS:ON
VSNVS:OFF
PWRON:Float
LOG:SWx:<log operator>
LOG:VGENx:<log operator>
LOG:VSWBST:<log operator>
LOG:VREFDDR:<log operator>
LOG:VSNVS:<log operator>
LOG:OTP_PU_CONFIG:<log operator> Shows the current value set as default by OTP.
Command
Disables the VREFDDR supply.
Enables the VSNVS supply
Disables the VSNVS supply.
Releases the PWRON signal to a high-impedance state, allowing the
PF0100 to start up. (Legacy for Revision A scripts)
Shows the current value of the <log operator> for the SWx regulator.
Log operators:
Shows the current value of the <log operator> for the VGENx regulator.
Log operators:
Shows the current value of the <log operator> for the VSWBST regulator.
Log operators:
Shows the current value of the <log operator> for the VREFDDR
regulator.
Log operators:
Shows the current value of the <log operator> for the VSNVS regulator.
Log operators:
Table 8. Command List
• VOUT = Output voltage in normal operation.
• STBY = Output voltage in STANDBY mode.
• OFF = Output voltage in OFF mode.
• MODE = Current switching mode set.
• OTP_VOUT = Default power up voltage set through OTP.
• OTP_SEQUENCE = Default power up sequence of regulator.
• VOUT = Output voltage.
• ENABLE = supply is ENABLED/DISABLED.
• OTP_VOUT = Default power up voltage set through OTP.
• OTP_SEQUENCE = Default power up sequence of regulator.
• VOUT = Output voltage.
• ENABLE = Supply is ENABLED/DISABLED.
• OTP_VOUT = Default power up voltage set through OTP.
• OTP_SEQUENCE = Default power up sequence of regulator.
• ENABLE = supply is ENABLED/DISABLED.
• OTP_SEQUENCE = Default power up sequence of regulator.
• VOUT = Output voltage.
• OTP_VOUT = Default power up voltage set through OTP.
• SEQ_CLK_SPEED = programmed power up sequencing speed.
• DVS_CLK_SPEED = programmed DVS speed.
• PWRON_MODE = programmed PWRON pin active level.
• PGOOD_ENABLE = Power good mode is on/off.
KTPF0100UG, Rev. 2.0
LOG Commands
(2)
Description
Freescale Semiconductor