ICE2B765P2 Infineon Technologies, ICE2B765P2 Datasheet - Page 2

• Manufacturer Part Number: ICE2B765P2
• Description: IC OFFLINE CTRLR SMPS CM TO220
• Manufacturer: Infineon Technologies
• Series: CoolSET®F2r

Specifications of ICE2B765P2

• Output Isolation: Isolated
• Frequency Range: 62 ~ 72kHz
• Voltage - Input: 8.5 ~ 22 V
• Voltage - Output: 650V
• Power (watts): 240W
• Operating Temperature: -40°C ~ 150°C
• Package / Case: TO-220-6 Formed Leads
• For Use With: EVALSF2-ICE2B765PIN - BOARD DEMO ICE2B765P 80W SMPSEVALSF2-ICE2A0565Z-12IN - BOARD DEMO ICE2A0565Z 10W SMPS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ICE2B765P2X; ICE2B765P2XK; SP000014701

CoolSET™-F2
Revision History:
Previous Version: 2.5.
Page
4,17~22,
24~28, 30~31
For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or
the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://
www.infineon.com.
CoolMOS™, CoolSET™ are trademarks of Infineon Technologies AG.
Edition 2006-12-25
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München
©
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted charac-
teristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address
list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
Infineon Technologies AG 1999.
Subjects (major changes since last revision)
Add ICE2A380P2
2006-12-25
Datasheet