HCPL-800J-000E Avago Technologies US Inc., HCPL-800J-000E Datasheet - Page 4

no-image

HCPL-800J-000E

Manufacturer Part Number
HCPL-800J-000E
Description
OPTOCOUPLER DAA PLC ISO 16SOIC
Manufacturer
Avago Technologies US Inc.
Datasheets

Specifications of HCPL-800J-000E

Package / Case
SO-16
Mounting Type
Surface Mount
Current - Supply
28mA
Voltage - Supply
4.75 V ~ 5.25 V
Operating Temperature
-40°C ~ 85°C
Applications
Powerline Data Access
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
HCPL-800J-000E
Manufacturer:
AVAGO
Quantity:
44
All specifications and figures are at the nominal (typical) operating conditions of V
GND2 = 0 V and T
Notes:
1. In accordance with UL1577, each optocoupler is proof tested by applying an insulation test voltage
2. The Control IC-Line IC Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as a Control IC-Line IC
3. Device is considered as a two terminal device: pins 1 - 8 shorted together and pins 9 - 16 shorted together.
4. Maximum power dissipation in Control side and Line side IC’s needs to be limited to ensure that their respective junction temperature is less
Recommended PB-free IR Profile
Note: Non-halide flux should be used
25 ° C
Parameter
Control IC - Line IC Momentary
Withstand Voltage
Resistance (Control IC - Line IC)
Capacitance (Control IC - Line IC)
Control IC to Ambient Thermal
Resistance
Line IC to Ambient Thermal
Resistance
detection current limit, I
DIN EN 60747-5-2 Insulation Characteristics Table, if applicable.
continuous voltage rating. For the continuous voltage rating refer to your equipment level safety specification or IEC/EN/DIN EN 60747-5-2
Insulation Characteristics Table.
than 125°C. The maximum permissible power dissipation is dependent on the thermal impedance and the ambient temperature. Details on
the typical thermal impedances are given in the Package Characteristics. Further details on applying this to an actual application can be found
in the Application Information section under Thermal Considerations.
150 ° C
60 ~ 150 sec
A
= +25°C.
I-O
200 ° C
5 µA). This test is performed before the 100% production test for partial discharge (method b) shown in IEC/EN/
217 ° C
Time (sec)
250 ° C
90 sec
60 sec
Symbol
V
R
C
θ
θ
I-O
IA
OA
ISO
I-O
260 ° C (Peak Temperature)
30 seconds
60 sec
Min.
3750
Typ.
>109
1.4
83
85
Max.
Units Test Conditions
V
pF
°C/W
rms
RH< 50%, t = 1 min.,
T
V
f = 1 MHz
1 oz. trace, 2-layer PCB
Still air, T
A
I-O
= 25°C
4500 Vrms for 1 second (leakage
= 500 Vdc
CC1
= 5 V, GND1 = 0 V, V
A
= 25°C
CC2
Note
1, 2, 3
3
4
= 5 V,

Related parts for HCPL-800J-000E