R0K561622S000BE Renesas Electronics America, R0K561622S000BE Datasheet - Page 285

• Manufacturer Part Number: R0K561622S000BE
• Description: KIT STARTER FOR H8SX/1622
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K561622S000BE

• Contents: Board, Cables, CD, Debugger, Power Supply
• Silicon Manufacturer: Renesas
• Features: Coding And Debugging, E10A Emulator, RS232 Serial Connection
• Kit Contents: Board
• Silicon Family Name: H8SX/1622F
• Silicon Core Number: R5F61622N50LGV
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: H8SX/1622
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

8.14.2
Even if a bus request is received from a bus master with a higher priority over that of the bus
master that has taken control of the bus and is currently operating, the bus is not necessarily
transferred immediately. There are specific timings at which each bus master can release the bus.
(1)
The CPU is the lowest-priority bus master, and if a bus request is received from the DTC or
DMAC, the bus arbiter transfers the bus to the bus master that issued the request.
The timing for transfer of the bus is at the end of the bus cycle. In sleep mode, the bus is
transferred synchronously with the clock.
Note, however, that the bus cannot be transferred in the following cases.
• The word or longword access is performed in some divisions.
• Stack handling is performed in multiple bus cycles.
• Transfer data read or write by memory transfer instructions, block transfer instructions, or TAS
• From the target read to write in the bit manipulation instructions or memory operation
(2)
The DTC sends the internal bus arbiter a request for the bus when an activation request is
generated. When the DTC accesses an external bus space, the DTC first takes control of the bus
from the internal bus arbiter and then requests a bus to the external bus arbiter.
Once the DTC takes control of the bus, the DTC continues the transfer processing cycles. If a bus
master whose priority is higher than the DTC requests the bus, the DTC transfers the bus to the
higher priority bus master. If the IBCCS bit in BCR2 is set to 1, the DTC transfers the bus to the
CPU.
Note, however, that the bus cannot be transferred in the following cases.
instruction.
(In the block transfer instructions, the bus can be transferred in the write cycle and the
following transfer data read cycle.)
instructions.
(In an instruction that performs no write operation according to the instruction condition, up to
a cycle corresponding the write cycle)
CPU
DTC
Bus Transfer Timing
Rev. 2.00 Sep. 16, 2009 Page 255 of 1036
Section 8 Bus Controller (BSC)
REJ09B0414-0200