R0K33062PS001BE Renesas Electronics America, R0K33062PS001BE Datasheet - Page 18

R0K33062P STARTER KIT

R0K33062PS001BE

Manufacturer Part Number
R0K33062PS001BE
Description
R0K33062P STARTER KIT
Manufacturer
Renesas Electronics America
Series
Renesas Starter Kits (RSK)r
Type
MCUr
Datasheets

Specifications of R0K33062PS001BE

Contents
CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
Silicon Manufacturer
Renesas
Features
Coding And Debugging, E8A Emulator, RS232 Serial Connection
Kit Contents
Board
Silicon Family Name
M16C/62P
Silicon Core Number
M30626FJPGP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With/related Products
M16C/62P
Lead Free Status / Rohs Status
Compliant
Other names
Q4300694
The RSK supports Boot mode and Single chip mode.
Details of programming the FLASH memory is described in the M16C/62P Group Hardware Manual.
7.1. Boot mode
The boot mode settings for this RSK are shown in Table 7-1: Boot Mode pin settings below:
The software supplied with this RSK only supports Boot mode using an E8A and HEW. However, hardware exists to enter boot mode
manually, do not connect the E8A in this case. Press and hold the SW1/BOOT. The mode pins above are held in their boot states while
reset is pressed and released. Release the boot button. The BOOT LED will be illuminated to indicate that the microcontroller is in boot
mode.
When neither the E8A is connected nor the board is placed in boot mode (with CNVSS and P5.5 being pulled low during reset) as above,
the P5.5 pin is pulled high by a 10k resistor, the P.5.0 pin is pulled high by a 100k resistor and the CNVSS is pulled low by a 100k resistor.
When an E8A is used these three pins are controlled by the E8A.
7.2. Single chip mode
As CNVSS is being pulled down by a 100k resistor, this RSK will always boot in Single Chip mode when the E8A is not connected and the
boot switch is not depressed. Refer to M16C/62 Group Hardware Manual for details of Single chip mode.
CNVSS
1
CNVSS
0
Chapter 7. Modes
Table 7-2: Single Chip Mode pin settings
1
1
P5.0
Table 7-1: Boot Mode pin settings
P5.0
0
1
P5.5
P5.5
14
Boot Mode
Single Chip Mode
LSI State after Reset
LSI State after Reset
End
End

Related parts for R0K33062PS001BE