AT91SAM9G45-EKES Atmel, AT91SAM9G45-EKES Datasheet - Page 31

KIT EVAL FOR AT91SAM9G45

AT91SAM9G45-EKES

Manufacturer Part Number
AT91SAM9G45-EKES
Description
KIT EVAL FOR AT91SAM9G45
Manufacturer
Atmel
Series
AT91SAM Smart ARMr
Type
MCUr

Specifications of AT91SAM9G45-EKES

Contents
Board
Processor To Be Evaluated
SAM9G45
Data Bus Width
32 bit
Interface Type
I2C, SPI, UART
Maximum Operating Temperature
+ 50 C
Minimum Operating Temperature
- 10 C
Operating Supply Voltage
1.8 V to 3.3 V
For Use With/related Products
AT91SAM9G45
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
Q4626953
8.3
8.4
8.5
6438ES–ATARM–21-Jun-10
Reset Controller
Shut Down Controller
Clock Generator
The Reset Controller is based on two Power-on-Reset cells, one on VDDBU and one on
VDDCORE.
The Reset Controller is capable to return to the software the source of the last reset, either a
general reset (VDDBU rising), a wake-up reset (VDDCORE rising), a software reset, a user
reset or a watchdog reset.
The Reset Controller controls the internal resets of the system and the NRST pin output. It is
capable to shape a reset signal for the external devices, simplifying to a minimum connection of
a push-button on the NRST pin to implement a manual reset.
The configuration of the Reset Controller is saved as supplied on VDDBU.
The Shut Down Controller is supplied on VDDBU and allows a software-controllable shut down
of the system through the pin SHDN. An input change of the WKUP pin or an alarm releases the
SHDN pin, and thus wakes up the system power supply.
The Clock Generator is made up of:
The USB Device and Host HS Clocks are provided by a the dedicated UTMI PLL (UPLL)
embedded in the UTMI macro.
• One Low Power 32768 Hz Slow Clock Oscillator with bypass mode
• One Low-Power RC oscillator
• One 12 MHz Main Oscillator, which can be bypassed
• One 400 to 800 MHz programmable PLLA, capable to provide the clock MCK to the
processor and to the peripherals. This PLL has an input divider to offer a wider range of
output frequencies from the 12 MHz input, the only limitation being the lowest input frequency
shall be higher or equal to 2 MHz.
AT91SAM9G45
31

Related parts for AT91SAM9G45-EKES