E62655RUSB Renesas Electronics America, E62655RUSB Datasheet - Page 316

• Manufacturer Part Number: E62655RUSB
• Description: EMULATOR BASE H8S/2655R W/USB
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of E62655RUSB

• Contents: E6000 Emulator Unit and 4 Logic Probes
• For Use With/related Products: H8S/2655R
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Section 7 DMA Controller
Full Address Mode (Burst Mode)
Figure 7.21 shows a transfer example in which TEND output is enabled and word-size full address
mode transfer (burst mode) is performed from external 16-bit, 2-state access space to external 16-
bit, 2-state access space.
In burst mode, one-byte or one-word transfers are executed consecutively until transfer ends.
In the transfer end cycle (the cycle in which the transfer counter reaches 0), a one-state DMA dead
cycle is inserted after the DMA write cycle.
If a request from another higher-priority channel is generated after burst transfer starts, that
channel has to wait until the burst transfer ends.
If an NMI is generated while a channel designated for burst transfer is in the transfer enabled state,
the DTME bit is cleared and the channel is placed in the transfer disabled state. If burst transfer
has already been activated inside the DMAC, the bus is released on completion of a one-byte or
one-word transfer within the burst transfer, and burst transfer is suspended. If the last transfer
cycle of the burst transfer has already been activated inside the DMAC, execution continues to the
end of the transfer even if the DTME bit is cleared.
Rev. 5.00 Sep 14, 2006 page 286 of 1060
REJ09B0331-0500
Address bus
TEND
HWR
Bus release
LWR
RD
Figure 7.21 Example of Full Address Mode (Burst Mode) Transfer
DMA
read
DMA
write
DMA
read
Burst transfer
DMA
write
DMA
read
Last transfer cycle
DMA
write
DMA
dead
Bus release