STEVAL-IFS001V1 STMicroelectronics, STEVAL-IFS001V1 Datasheet - Page 16

EVAL BOARD 3AXIS MEMS ACCELLRMTR

STEVAL-IFS001V1

Manufacturer Part Number
STEVAL-IFS001V1
Description
EVAL BOARD 3AXIS MEMS ACCELLRMTR
Manufacturer
STMicroelectronics
Series
MEMSr

Specifications of STEVAL-IFS001V1

Design Resources
STEVAL-IFS001V1 Gerber Files STEVAL-IFS001V1 Schematic STEVAL-IFS001V1 Bill of Material
Sensor Type
Accelerometer, 3 Axis
Sensing Range
±2g, 6g
Interface
I²C, SPI
Sensitivity
1024 LSb/g
Voltage - Supply
2.16 V ~ 3.6 V
Embedded
Yes, MCU, 8-Bit
Utilized Ic / Part
LIS3LV02DQ
Processor To Be Evaluated
LIS3LV02DQ
Interface Type
USB
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
497-5069

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
STEVAL-IFS001V1
Manufacturer:
ST
0
4 Application Hints
4
4.1
16/42
Application Hints
Figure 3.
The device core is supplied through Vdd line while the I/O pads are supplied through Vdd_IO
line. Power supply decoupling capacitors (100 nF ceramic, 10 µF Al) should be placed as near
as possible to the pin 3 of the device (common design practice).
All the voltage and ground supplies must be present at the same time to have proper behavior
of the IC (refer to Fig. 3). It is possible to remove Vdd mantaining Vdd_IO without blocking the
communication busses.
The functionality of the device and the measured acceleration data is selectable and accessible
through the I
floating. Refer to application note AN2041 for further information on device usage.
Soldering Information
The QFN-28 package is lead free and green package qualified for soldering heat resistance
according to JEDEC J-STD-020C. Central die pad and pin #1 indicator are physically
connected to GND. Land pattern and soldering recommendations are available upon request.
Vdd
LIS3LV02DQ Electrical Connection
2
C/SPI interface.When using the I
GND
10uF
100nF
Digital signal from/to signal controller.Signal’s levels are defined by proper selection of Vdd_IO
1
7
28
8
LIS3LV02DQ
(TOP VIEW)
CD00047926
22
14
2
C, CS must be tied high while SDO must be left
21
15
Vdd_IO
DIRECTION OF THE
DETECTABLE
ACCELERATIONS
Z
1
LIS3LV02DQ
Y
X

Related parts for STEVAL-IFS001V1