STEVAL-IFS001V1 STMicroelectronics, STEVAL-IFS001V1 Datasheet - Page 29

• Manufacturer Part Number: STEVAL-IFS001V1
• Description: EVAL BOARD 3AXIS MEMS ACCELLRMTR
• Manufacturer: STMicroelectronics
• Series: MEMSr

Specifications of STEVAL-IFS001V1

• Design Resources: STEVAL-IFS001V1 Gerber Files STEVAL-IFS001V1 Schematic STEVAL-IFS001V1 Bill of Material
• Sensor Type: Accelerometer, 3 Axis
• Sensing Range: ±2g, 6g
• Interface: I²C, SPI
• Sensitivity: 1024 LSb/g
• Voltage - Supply: 2.16 V ~ 3.6 V
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: LIS3LV02DQ
• Processor To Be Evaluated: LIS3LV02DQ
• Interface Type: USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 497-5069

LIS3LV02DQ
7.11
7.12
7.13
7.14
HP_FILTER_RESET (23h)
Dummy register. Reading at this address zeroes instantaneously the content of the internal
high pass-filter. Read data is not significant.
STATUS_REG (27h)
OUTX_L (28h)
In Big Endian Mode (bit BLE CTRL_REG2 set to ‘1’) the content of this register is the MSB
acceleration data and depends by bit DAS in CTR_REG2 reg as described in the following
section.
OUTX_H (29h)
When reading the register in “12 bit right justified” mode the most significant bits (15:12) are
replaced with bit 11 (i.e. XD15-XD12=XD11, XD11, XD11, XD11).
In Big Endian Mode (bit BLE CTRL_REG2 set to ‘1’) the content of this register is the LSB
acceleration data.
ZYXOR
ZOR
YOR
XOR
ZYXDA
ZDA
YDA
XDA
XD7, XD0
XD15, XD8
X, Y and Z axis Data Overrun
Z axis Data Overrun
Y axis Data Overrun
X axis Data Overrun
X, Y and Z axis new Data Available
Z axis new Data Available
Y axis new Data Available
X axis new Data Available
X axis acceleration data LSB
X axis acceleration data MSB
ZYXOR
XD15 XD14 XD13 XD12 XD11 XD10
XD7
ZOR
XD6
YOR XOR
XD5
CD00047926
XD4
ZYXDA
XD3
XD2
ZDA
XD1
XD9
YDA
XD0
XD8
XDA
7 Register Description
29/42