10018784-10011TLF FCI, 10018784-10011TLF Datasheet - Page 3

• Manufacturer Part Number: 10018784-10011TLF
• Description: CONN PCI EXPRESS 64POS VERT PCB
• Manufacturer: FCI
• Series: 10018784 Seriesr

Specifications of 10018784-10011TLF

• Card Type: PCI Express™
• Card Thickness: 0.062" (1.57mm)
• Gender: Female
• Number Of Positions: 64
• Pitch: 0.039" (1.00mm)
• Number Of Rows: 2
• Mounting Type: Through Hole
• Features: Board Guide, Card Specific, Ramp
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Black
• Product Type: PCI Express
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 609-2014

3.0 MECHANICAL REQUIREMENTS
TITLE
This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI. No part of the information shown on the document may be used in any way or
disclosed to others without the written consent of FCI.
Form E-3005
Rev E
3.2 INSERTION / WITHDRAWAL FORCE- ADD IN CARD
3.1
3.3
of 25.4 mm/minute.
2.6 SOLDERTAIL TERMINATION
PER EIA-364-13
Mating cycle is with maximum/minimum thickness gage at a rate
Samples must comply to applicable FCI product prints.
CONTACT RETENTION
2.5.5 Pad and trace design: pad and trace design shall follow
3.2.1 Maximum insertion force is 1.15 N max. per contact pair
3.2.2 Withdrawal force is 0.15N minimum per contact pair when
2.6.1A 2.4mm +/- 0.13 (0.094 +/- 0.005) thick FR-4 glass
2.6.2 Solder washers, AFCI part number 78523-001, shall be
PCI EXPRESS
Tests requiring termination of the soldertails to a PC
EXAMINATION OF PRODUCT
board shall be prepared as follows:
PCI Express standard as depicted in customer drawing.
epoxy board having no internal ground planes with
plated thru holes in the pattern specified in AFCI
customer drawing, shall be used.
applied to the tails, and the connector vapor phase
reflowed at 215°C (419°F) for a time not to exceed 2
minutes.
when measured with a 1.70 +0.00/-0.01(0.067 +0.000/
-0.004 inches) thick hardened steel card made to the
dimensions shown for the PCI Express expansion board
in the FCI customer drawing. The card has a R0.05 min.,
R0.10 max.(sharpedge)and the surface roughness in
connector area to be 0.10 micrometers (4 microinches)
maximum.
measured with a 1.44 +0.01/-0.00 (0.067 +0.004/-0.000
inches) thick hardened steel card made to the
dimensions shown for the PCI Express expansion board
in the FCI customer drawing.
min., R0.10 max
roughness in the connector area to be 0.10 micrometers
(4 microinches) maximum.
Copyright FCI.
Type
TM
CONNECTOR
PRODUCT SPECIFICATION
PDM: Rev:H
(sharp edge) and the surface
STATUS:
The card has a R0.05
NUMBER
PAGE
AUTHORIZED BY
Richard Chiu
Released
3 of
11
GS-12-233
Printed: Aug 02, 2008
DATE
07/04/08
REV.
H
GS-01-001
.