PIC16C63A-20I/SP Microchip Technology, PIC16C63A-20I/SP Datasheet - Page 168

• Manufacturer Part Number: PIC16C63A-20I/SP
• Description: IC MCU OTP 4KX14 PWM 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C63A-20I/SP

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 22
• Program Memory Type: OTP
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Controller Family/series: PIC16C
• No. Of I/o's: 22
• Ram Memory Size: 192Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 192 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 8
• Operating Supply Voltage: 4.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVMCPA - KIT DVR BOARD EVAL SYSTEM MXDEV1
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

PIC16C63A/65B/73B/74B
APPENDIX D:
This section discusses how to migrate from a baseline
device (i.e., PIC16C5X) to a mid-range device (i.e.,
PIC16CXXX).
The following are the list of modifications over the
PIC16C5X microcontroller family:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Wake up from SLEEP through interrupt is
11. Two separate timers, Oscillator Start-up Timer
12. PORTB
13. T0CKI pin is also a port pin (RA4) now.
14. FSR is made a full 8-bit register.
15. “In-Circuit Serial Programming” (ICSP) is made
16. PCON status register is added with a Power-on
17. Code protection scheme is enhanced, such that
18. Brown-out protection circuitry has been added.
DS30605C-page 168
Instruction word length is increased to 14-bits.
This allows larger page sizes, both in program
memory (2 K now as opposed to 512 before)
and register file (128 bytes now versus 32 bytes
before).
A PC high latch register (PCLATH) is added to
handle program memory paging. Bits PA2, PA1
and PA0 are removed from STATUS register.
Data memory paging is redefined slightly.
STATUS register is modified.
Four new instructions have been added:
RETURN, RETFIE, ADDLW and SUBLW.
Two instructions, TRIS and OPTION, are being
phased out, although they are kept for compati-
bility with PIC16C5X.
OPTION and TRIS registers are made address-
able.
Interrupt capability is added. Interrupt vector is
at 0004h.
Stack size is increased to 8-deep.
RESET vector is changed to 0000h.
RESET of all registers is revisited. Five different
RESET (and wake-up) types are recognized.
Registers are reset differently.
added.
(OST) and Power-up Timer (PWRT) are
included for more reliable power-up. These tim-
ers are invoked selectively to avoid unneces-
sary delays on power-up and wake-up.
interrupt-on-change feature.
possible. The user can program PIC16CXX
devices using only five pins: V
MCLR/V
Reset status bit (POR).
portions of the program memory can be pro-
tected, while the remainder is unprotected.
Controlled by configuration word bit BODEN.
Brown-out Reset ensures the device is placed in
a RESET condition if V
setpoint.
PP
, RB6 (clock) and RB7 (data in/out).
has
MIGRATION FROM BASELINE TO MID-RANGE DEVICES
weak
DD
dips below a fixed
pull-ups
DD
, V
and
SS
,
To convert code written for PIC16C5X to PIC16CXX,
the user should take the following steps:
1.
2.
3.
4.
5.
Remove any program memory page select
operations (PA2, PA1, PA0 bits) for CALL, GOTO.
Revisit any computed jump operations (write to
PC or add to PC, etc.) to make sure page bits
are set properly under the new scheme.
Eliminate any data memory page switching.
Redefine data variables to reallocate them.
Verify all writes to STATUS, OPTION and FSR
registers since these have changed.
Change RESET vector to 0000h.
2000 Microchip Technology Inc.