PIC16F916-I/SP Microchip Technology, PIC16F916-I/SP Datasheet - Page 6

• Manufacturer Part Number: PIC16F916-I/SP
• Description: IC PIC MCU FLASH 8KX14 28SDIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F916-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 14KB (8K x 14)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 256 x 8
• Ram Size: 352 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 352 B
• Interface Type: SSP/I2C/AUSART/SPI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DV164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 5-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC16F91X/946
Data Sheet Clarifications
The following typographical corrections and clarifica-
tions are to be noted for the latest version of the device
data sheet (DS41250F):
1. Module: LCD Driver Module Block
DS80238C-page 6
Note:
In Figure 10-1; “LCD Driver Module Block Dia-
gram,” page 144, change Note 1:
From: These are not directly connected to the I/O
To:
Corrections are shown in bold. Where
possible, the original bold text formatting
has been removed for clarity.
pads, but may be tri-stated, depending on
the configuration of the LCD module.
These signals are connected directly to
the I/O pads, but may be tri-stated,
depending on the configuration of the LCD
module.
Diagram (Note 1)
APPENDIX A:
Rev A Document (5/2005)
Initial release of Errata, adding Items 1-3.
Rev B Document (2/2007)
Added Module 1: LCD.
Rev. C Document (4/2009)
Updated Errata to new format. This Errata supersedes
Errata DS80329.
Data
CCPR2L/CCPR2H Address and Module 3: MCLR.
Added Module 2: LP/Timer1 Oscillator Operation
Below 25°C; Added Module 3: Asynchronous Timer1;
Module 4: Timer0 and WDT Prescaler Assignment
Spurious Reset.
Sheet
Clarification:
DOCUMENT
REVISION HISTORY
© 2009 Microchip Technology Inc.
Removed
Module
1: