PIC16C73A-04/SO Microchip Technology, PIC16C73A-04/SO Datasheet - Page 3

• Manufacturer Part Number: PIC16C73A-04/SO
• Description: IC MCU OTP 4KX14 A/D PWM 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C73A-04/SO

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Oscillator Type: External
• Core Processor: PIC
• Speed: 4MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: OTP
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 6 V
• Data Converters: A/D 5x8b
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: PIC16C
• No. Of I/o's: 22
• Ram Memory Size: 192Byte
• Cpu Speed: 10MHz
• No. Of Timers: 3
• No. Of Pwm: RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT28SO-1 - SOCKET TRANSITION 28SOIC 300MIL309-1073 - ADAPTER 28-SOIC TO 28-SOIC309-1024 - ADAPTER 28-SOIC TO 28-DIP309-1023 - ADAPTER 28-SOIC TO 28-DIP
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PIC16C73A-04/SOR; PIC16C73A-04/SOR

7. Module: Timer1
EXAMPLE 2:
EXAMPLE 3:
EXAMPLE 4:
 2001 Microchip Technology Inc.
The Timer1 value may unexpectedly increment if
either the TMR1H, or the TMR1L register is writ-
ten. If Timer1 is ON and then turned OFF, perform-
ing any write instruction with TMR1H as the
destination, may cause TMR1L to increment.
If Timer1 is ON and then turned OFF when
TMR1H:TMR1L = xx:FF, performing any write
instruction with TMR1L as the destination may
cause TMR1H to increment.
Work around
To preserve Timer1 register values:
a) Read Timer1 register values into “shadow”
b) Perform any write instruction(s) on the
c) Write the shadow register values back into
BSF T1CON, TMR1ON
BCF T1CON, TMR1ON
MOVF TMR1H, 1
TMR1 value before MOVF instruction:
TMR1 value after MOVF instruction:
BSF T1CON, TMR1ON
BCF T1CON, TMR1ON
CLRF TMR1L
TMR1 value before CLRF instruction:
TMR1 value after CLRF instruction:
(TMR1IF is not set.)
BSF T1CON, TMR1ON
BCF T1CON, TMR1ON
MOVF TMR1H, 1
TMR1 value before MOVF instruction:
TMR1 value after MOVF instruction:
registers.
shadow registers.
the Timer1 registers.
TMR1H:TMR1L = FF:FF
TMR1H:TMR1L = FF:00
TMR1H:TMR1L = FF:FF
TMR1H:TMR1L = 00:00
TMR1H:TMR1L = 3F:00
TMR1H:TMR1L = 3F:01
:
:
TMR1L INCREMENT
(CASE 1)
TMR1L INCREMENT
(CASE 2)
TMR1H INCREMENT
8. Module: USART
When the USART (SCI) is configured in Asynchro-
nous mode with the BRGH bit set, a high number
of receive errors may be experienced. For asyn-
chronous receive operations, it is recommended
that the USART be configured with the BRGH bit
cleared.
PIC16C73A
DS80088A-page 3