MC33269D-3.3G ON Semiconductor, MC33269D-3.3G Datasheet - Page 13

• Manufacturer Part Number: MC33269D-3.3G
• Description: IC REG LDO 800MA 3.3V 8SOIC
• Manufacturer: ON Semiconductor

Specifications of MC33269D-3.3G

• Regulator Topology: Positive Fixed
• Voltage - Output: 3.3V
• Voltage - Input: Up to 20V
• Voltage - Dropout (typical): 1.1V @ 800mA
• Number Of Regulators: 1
• Current - Output: 800mA
• Current - Limit (min): 800mA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 20 V
• Output Voltage: 3.3 V
• Output Type: Fixed
• Dropout Voltage (max): 1.25 V at 500 mA
• Output Current: 800 mA
• Line Regulation: 0.3 %
• Load Regulation: 0.5 %
• Voltage Regulation Accuracy: 1 %
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Voltage Regulator Type: Linear
• Topology: LDO
• Regulator Output Type: Fixed
• Polarity Type: Positive
• Input Voltage (max): 20V
• Package Type: SOIC N
• Output Voltage Accuracy: ±1%
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Dropout Voltage@current (typ): 1@500mA/1.1@800mA
• Pin Count: 8
• Mounting: Surface Mount
• Quiescent Current (max): 8mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: MC33269D-3.3GOS

PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
H
Q
Z
L
V
G
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
1 2 3
4
B
N
D
A
K
F
T
U
N. American Technical Support: 800−282−9855 Toll Free
Europe, Middle East and Africa Technical Support:
Japan Customer Focus Center
PACKAGE DIMENSIONS
TO−220AB, SINGLE GAUGE
USA/Canada
Phone: [phone]
Phone: 81−3−5773−3850
R
J
S
http://onsemi.com
CASE 221AB−01
C
T SUFFIX
ISSUE O
−T−
13
SEATING
PLANE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
Y14.5M, 1982.
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
0.570
0.380
0.160
0.025
0.142
0.095
0.110
0.018
0.500
0.045
0.190
0.100
0.080
0.020
0.235
0.000
0.045
MIN
---
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
INCHES
0.620
0.405
0.190
0.035
0.147
0.105
0.155
0.025
0.562
0.060
0.210
0.120
0.055
0.255
0.050
0.080
0.110
MAX
---
14.48
12.70
0.508
MILLIMETERS
MIN
9.66
4.07
0.64
3.61
2.42
2.80
0.46
1.15
4.83
2.54
2.04
5.97
0.00
1.15
---
15.75
10.28
14.27
MAX
4.82
0.88
3.73
2.66
3.93
0.64
1.52
5.33
3.04
2.79
1.39
6.47
1.27
2.04
---
MC33269/D