MP2060-1.00-1% Caddock Electronics Inc, MP2060-1.00-1% Datasheet
![RESISTOR 1.00 OHM 60W 1% TO-220](/photos/13/50/135058/683-to-220_mp2060_sml.jpg)
MP2060-1.00-1%
Manufacturer Part Number
MP2060-1.00-1%
Description
RESISTOR 1.00 OHM 60W 1% TO-220
Manufacturer
Caddock Electronics Inc
Series
Kool-Pak®MP2060r
Datasheet
1.MP2060-10.0-1.pdf
(1 pages)
Specifications of MP2060-1.00-1%
Tolerance
±1%
Temperature Coefficient
-20/ +80ppm/°C
Resistance (ohms)
1
Power (watts)
60W
Composition
Thick Film
Features
Current Sense, Non-Inductive
Size / Dimension
0.410" L x 0.175" W (10.41mm x 4.45mm)
Height
0.640" (16.26mm)
Lead Style
Through Hole
Package / Case
TO-220-2
Resistance In Ohms
1.00
Case
TO-220
Resistance
1 Ohms
Power Rating
60 Watts
Termination Style
Radial
Voltage Rating
250 Volts
Operating Temperature Range
- 55 C to + 150 C
Dimensions
10.41 mm W x 16.26 mm L x 4.45 mm H
Lead Spacing
5.08 mm
Product
Thick Film Resistors Leaded
Brand/series
MP2060 Series
Lead Pitch
0.200 in. +⁄- 0.010 in.
Length
0.640 in. +⁄- 0.010 in.
Length, Lead
0.500 in. +⁄- 0.050 in.
Material, Element
Thick Film
Package Type
TO-220
Power, Rating
60 W
Resistance, Thermal, Junction To Case
2.08 °C⁄W
Temperature, Operating, Maximum
150 °C
Temperature, Operating, Minimum
-55 °C
Termination
Radial
Thickness
0.175 in. +⁄- 0.010 in.
Voltage, Rating
250 VDC
Width
0.410 in. +⁄- 0.010 in.
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
MP2060-1.00F
© 2004 Caddock Electronics, Inc.
Applications Engineering
17271 North Umpqua Hwy.
Roseburg, Oregon 97470-9422
Phone: (541) 496-0700
Fax: (541) 496-0408
•
•
•
•
•
•
•
•
Ordering Information:
Packaging Information: MP2060 resistors are packaged in plastic shipping tubes, 50 pieces
per tube. These resistors are available in a 50 piece minimum quantity and in full tube
quantity increments (i.e. 50, 100, 150, etc.).
MP2060
(12.70 ± 1.27)
0.500 ± 0.050
0.150 ± 0.030
Model
(3.81 ± 0.76)
DIMENSIONS IN INCHES AND (MILLIMETERS)
The thermal design should satisfy the following equation:
Case Temperature (Tc) + [Thermal Resistance (R
operating temperature range of the application.
Mounting Note: Mount on a smooth, clean and flat heat sink surface with a thermal interface material, such as
thermal grease. The entire exposed ceramic portion must be in contact with the heat sink. When using a
spring clip, it is recommended that a mounting force of 8 to 30 pounds (35 to 130 N) be applied to the center of
the package. The clip should be round or smooth in the contact area to avoid concentrating the load on a small
point of the plastic body of the package. Another mounting option is to use a pressure bar method which can
achieve a greater mounting force with a greater contact area.
For additional applications information regarding mounting and pulse handling see the Caddock Ap-
plications Notes at caddock.com or contact Applications Engineering.
Up to 60 Watts continuous power at +25°C case temperature, 0.020Ω and above.
Up to 60 Amps continuous current at +25°C case temperature, 0.015Ω and below.
TO-220 Style package utilizes proven power semiconductor thermal solutions.
Equivalent to UL94 V-0 flammability rating.
Excellent pulse/surge performance.
Non-inductive design for high speed switching, snubbers and rf applications.
Operation up to +150°C case temperature.
Electrically isolated case.
MP2060 Kool-Pak
TO-220 Style Power Resistor Designed for Clip Mounting -
100
Package
80
60
40
20
TO-220
0
Style
(10.41 ± 0.26)
0.410 ± 0.010
MP2060
25
50.0
1%
CASE TEMPERATURE, °C
Model Number:
Derating Curve
0.020Ω to 1.00K
Resistance
0.050 ± 0.007
0.200 ± 0.010
(5.08 ± 0.26)
(1.27 ± 0.18)
0.100 ± 0.020
0.005Ω
0.010Ω
0.015Ω
(2.54 ± 0.51)
100
CAD
Resistor Value:
For Caddock Distributors listed by country see caddock.com/contact/dist.html
18 Watts
36 Watts
54 Watts
60 Watts
MP2060 - 0.050 - 1%
Power
Rating
0.640 ± 0.010
(16.26 ± 0.26)
150
0.175 ± 0.010
0.105 ± 0.010
(4.45 ± 0.26)
(2.67 ± 0.26)
0.035 ± 0.007
(0.89 ± 0.18)
θJC
) x power applied (Watts)] ≤ 150°C, considering the full
e-mail: caddock@caddock.com • web: www.caddock.com
*
DOC
*
*
*
Rating (Amps)
Max. Current
All power and associated overload ratings are
derated based upon case temperature using the
derating curve. The case temperature is mea-
sured at the center of the ceramic mounting sur-
face, with the part properly mounted and under
electrical load. Without a heat sink, when in free
air at +25°C, the MP2060 is rated for 2.5 watts.
*
I = P/ R
For custom values and tolerances contact
Applications Engineering
®
Derating Using Case Temperature (T C ):
60 A
60 A
60 A
Standard Resistance Values:
0.005 Ω 5%
0.010 Ω 2%
0.015 Ω 2%
0.020 Ω
0.025 Ω
0.030 Ω
0.033 Ω
0.040 Ω
0.050 Ω
0.075 Ω
Tolerance: 1% Standard (except as noted)
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
Clip Mount
rms
rms
rms
K
Tolerance
250 V
Current
Limited
Current
Limited
Current
Limited
Voltage
Max.
0.33 Ω
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
3.30 Ω
4.00 Ω
5.00 Ω
7.50 Ω
8.00 Ω
rms
Thermal Resistance
Film (
10.0 Ω
12.0 Ω
15.0 Ω
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
50.0 Ω
56.0 Ω
75.0 Ω
6.94°C/Watt
3.47°C/Watt
2.31°C/Watt
2.08°C/Watt
J
) to Case (
R
θ
JC
100 Ω
120 Ω
150 Ω
200 Ω
250 Ω
300 Ω
330 Ω
400 Ω
470 Ω
500 Ω
560 Ω
750 Ω
1.00 K
Power Film Resistor
C
)
These products are covered by one or more
patents, also patents pending.
Specifications:
Temperature Coefficient:
TC referenced to +25°C, ΔR taken at +150°C
0.50 ohm and above, -20 to +80 ppm/°C
0.050 ohm to 0.49 ohm, 0 to +100 ppm/°C
0.015 ohm to 0.049 ohm, 0 to +200 ppm/°C
0.005 ohm to 0.014 ohm, 0 to +300 ppm/°C
Operating Temperature: -55°C to +150°C
Inductance: 10 nH typical in series when
measured at the shoulder of the lead.
Capacitance: <1 pf typical without heat sink.
DWV: 1500 V
surface or a clip in contact with the top surface.
Insulation Resistance: 10,000 Megohms, min.
The resistor element is electrically isolated from the
mounting surface.
Momentary Overload: 1.5 times rated power for
5 seconds, ΔR ±(0.5 percent + 0.0005 ohm) max.
Load Stability: 2000 hours at rated power
ΔR less than ±(1 percent +0.0005 ohm).
Moisture Resistance: Mil-Std-202, Method 106,
ΔR ±(0.5 percent + 0.0005 ohm) max.
Thermal Shock: Mil-Std-202, Method 107,
Cond. F, ΔR ±(0.5 percent + 0.0005 ohm) max.
Shock: 100G, Mil-Std-202, Method 213,
Cond. I, ΔR ±(0.4 percent + 0.0005 ohm) max.
Vibration, High Frequency: Mil-Std 202,
Method 204, Condition D, ΔR ±(0.4 percent
+ 0.0005 ohm) max.
Terminal Strength: Mil-Std-202, Method 211,
Cond. A (Pull Test) 5 lbs., ΔR ±(0.2 percent
+ 0.0005 ohm) max.
Terminal Material: Solderable
Measurement Note: Resistance measurements
shall be made at 0.2 inch (5.08 mm) from the
resistor body.
Non-Inductive
rms
AC isolation to the mounting
Riverside, California 92507-2364
Sales and Corporate Office
Phone: (951) 788-1700
1717 Chicago Avenue
Fax: (951) 369-1151
28_IL128.1004