FI212P089213-T Taiyo Yuden, FI212P089213-T Datasheet - Page 10

• Manufacturer Part Number: FI212P089213-T
• Description: FILTER DIPLEXER 892/1940MHZ SMD
• Manufacturer: Taiyo Yuden

Specifications of FI212P089213-T

• Featured Product: Multilayer Diplexers and Dual Low Pass Filters
• Frequency Bands (low / High): 824MHz ~ 960MHz / 1.71GHz ~ 2.17GHz
• Low Band Attenuation (min / Max Db): 13.00dB / -
• High Band Attenuation (min / Max Db): 19.00dB / -
• Return Loss (low Band / High Band): 9.5dB / 9.5dB
• Mounting Type: Surface Mount
• Package / Case: 2012 (5030 Metric)
• Filter Type: High Pass
• Filter Case: 0805
• Termination Type: SMD
• Rohs Compliant: Yes
• Reel Quantity: 3000
• Filter Terminals: SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 587-2661-2

chipfil_reli-PRP3
■
■ Please contact of our offices for further details of specifications.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
Precautions
1. PCB Design
2. Soldering
3. Storage conditions
Technical
consider-
Technical
consider-
Technical
consider-
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
All of the standard values listed here are subject to change without notice.
Therefore,please check the specifications carefully before use.
PRECAUTIONS
ations
ations
ations
◆Land pattern design
◆Conditions for Reflow soldering (for reference)
◆Storage
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control temperature and hu-
1. If the parts are stocked in a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
【Reflow Profile】
・ Recommended conditions
・ The packaging material should be kept where no chlorine or sulfur exists in the air.
Land pattern dimension examples
midity in the storage area. Humidity should especially be kept as low as possible.
and deterioration of taping/ packaging materials may take place. For this reason, components should be used within 6 months from the time of delivery. If
exceeding the above period, please check the solderability before using the filter.
The ambient temperature must be kept below 30℃.
Even under ideal storage conditions, the solderbility of electrodes decreases gradually, so filters should be mounted within 6 months from the time of deliv-
ery.
Ambient temperature : ー20～＋35℃
Humidity
FI168T/D Type
FI212B Type
FI212P Type
0.50
0.25
: Below 60%RH
Unit : mm
Unit : mm
1.0
FI212B245025/FI212B190223
0.45
0.8
FI168B/L Type
FI105B/L Type
0.3
0.7
0.2
1 1
Unit : mm
Unit : mm
※ Components should be preheated to within
※ Assured to be reflow soldering for 2 times.
Note : The above profiles are the maximum allow-
100 to 130℃ from soldering temperature.
able soldering condition, therefore these
profiles are not always recommended.
FI212C Type
FI212L Type
Unit : mm
Unit : mm
chipfil_reli_e-01