EAP-E Telegesis Ltd, EAP-E Datasheet

EAP-E

Manufacturer Part Number

EAP-E

Description

ZIGBEE ETHERNET ACCESS POINT

Manufacturer

Telegesis Ltd

Datasheets

1.EAP-E.pdf (16 pages)

2.EAP-E.pdf (1 pages)

Specifications of EAP-E

Function

Transceiver, ZigBee

Modulation Or Protocol

802.15.4 Zigbee

Frequency

2.4GHz

Applications

ISM

Interface

RJ-45 Ethernet

Sensitivity

-98dBm

Power - Output

4dBm

Voltage - Supply

4.5 V ~ 6 V

Lead Free Status / RoHS Status

Lead free / RoHS Compliant

Features

Data Rate - Maximum

Other names

920-1004

Current page: 1 of 1
Download datasheet (129Kb)

ACCESS POINT FEATURES

•

WINDOWS SOFTWARE

As a helpful starting point for developers, Telegesis

supplies the simple Telegesis Terminal Application with

the EAP. Device deployment and network initiation are

simplified with Dynamic Host Protocol Support (DHCP)

and additional IP configuration methods via the included

Windows®-based Lantronix DeviceInstaller™ software.

The supported Com Port Redirector™ (CPR) software

maps ‘virtual COM’ ports on a PC platform and redirects

application data destined to an attached device. Rather

than going out of the local COM port, the data is

transmitted across the Ethernet network to/from the

Lantronics ® XPort Direct

licensed as an API to OEMs for incorporation into their

applications on non-PC platforms such as a web pad or

PDA.

The EAP-E is also available in a Power Amplified

form – see ETRX2-PA for range & specification

details.

Combines a Telegesis ETRX2 module with a

Lantronix® serial to Ethernet bridge.

Complete TCP/IP protocol stack and Windows

deployment software.

Interface: Ethernet 10Base-T or 100Base-TX

(Auto-Sensing).

Link and activity indicator (LED).

Management: Telnet and Microsoft Windows®-

based utility for configuration.

Can offer access to the remote AT-Command

Interface via a virtual Com port.

SIF interface for Custom application development

and real time debugging of custom firmware.

using TCP/IP. CPR is also

EAP-E – (ZigBee Technology)

Wireless Mesh Networking Ethernet Access Point

To accompany the Telegesis ETRX2 wireless mesh networking

modules the EAP-E Ethernet Access Points offer an easy way

to interact with remote ZigBee networks using Ethernet.

Via Telnet, or a virtual COM port, the Telegesis AT-Command

interface - based on the EmberZNet meshing stack - can be

easily accessed by the application software. Custom firmware

development is also supported.

ETRX2 FEATURES

•

SUGGESTED APPLICATIONS

•

The ETRX2 is based on the Ember Corporation EM250

single chip ZigBee / 802.15.4 solution with on die 16-bit

XAP2b microprocessor.

No need for RF design experience or expertise.

2.4GHz ISM Band digital direct sequence spread

spectrum transceiver.

Hardware acceleration for IEEE802.15.4 operations.

Hardware supported encryption (AES-128).

Pre-programmed with Telegesis AT-Command

interface based on the EmberZNet meshing stack.

Can be configured to act as a ZigBee coordinator,

router or end device.

Up to 4dBm output power.

Sensitivity up to -98dBm (1% PER).

Remote Diagnostics and upgrades.

Networked remote control.

Remote data acquisition – e.g. temperature monitoring.

Bridging between Ethernet and ZigBee

Related parts for EAP-E

Related keywords

EAP-E datasheet
EAP-E data sheet
EAP-E pdf datasheet
EAP-E component
EAP-E part
EAP-E distributor
EAP-E RoHS
EAP-E datasheet download