MC13202FC Freescale Semiconductor, MC13202FC Datasheet - Page 17

• Manufacturer Part Number: MC13202FC
• Description: IC TXRX RF 2.4GHZ 32-QFN
• Manufacturer: Freescale Semiconductor

Specifications of MC13202FC

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: AMR, HID, HVAC, ISM
• Power - Output: -27dBm ~ 3dBm
• Sensitivity: -92dBm
• Voltage - Supply: 2 V ~ 3.4 V
• Current - Receiving: 37mA
• Current - Transmitting: 30mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-QFN
• Operating Supply Voltage: 2.7 V
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Freescale Semiconductor
1
2
3
Pin #
EP
27
28
29
30
31
32
The transceiver GPIO pins default to inputs at reset. There are no programmable pullups on these pins. Unused GPIO pins
should be tied to ground if left as inputs, or if left unconnected, they should be programmed as outputs set to the low state.
During low power modes, input must remain driven by MCU.
By default MISO is tri-stated when CE is negated. For low power operation, miso_hiz_en (Bit 11, Register 07) should be set
to zero so that MISO is driven low when CE is negated.
XTAL2
VDDLO2
VDDLO1
VDDVCO
VBATT
VDDA
Ground
Pin Name
Input/Output
Power Input
Power Input
Power Output
Power Input
Power Output
Type
Table 8. Pin Function Description (continued)
Crystal Reference oscillator output
Note: Do not load this pin by using it
LO2 VDD supply. Connect to VDDA
externally.
LO1 VDD supply. Connect to VDDA
externally.
VCO regulated supply bypass.
Analog voltage regulators Input.
Connect to Battery.
Analog regulated supply Output.
Connect to directly VDDLO1 and
VDDLO2 externally and to PAO±
through a bias network.
Note: Do not use this pin to supply
circuitry external to the chip.
External paddle / flag ground.
MC13202 Technical Data, Rev. 1.5
as a 16 MHz source. Measure
16 MHz output at Pin 15,
CLKO, programmed for 16
MHz. See the MC13202
Reference Manual for details.
Description
Connect to 16 MHz crystal and load
capacitor.
Decouple to ground.
Decouple to ground.
Decouple to ground. Only active high when
CCA, RX, or TX sequences in progress.
Connect to ground.
Functionality
17