MFRC53001T/0FE,112 NXP Semiconductors, MFRC53001T/0FE,112 Datasheet - Page 3

• Manufacturer Part Number: MFRC53001T/0FE,112
• Description: IC MIFARE HS READER 32-SOIC
• Manufacturer: NXP Semiconductors
• Series: MIFARE®r

Specifications of MFRC53001T/0FE,112

• Rf Type: Read Only
• Frequency: 13.56MHz
• Features: ISO14443-A, ISO14443-B, ISO15693
• Package / Case: 32-SOIC (0.300", 7.50mm Width)
• Product: RFID Readers
• Operating Temperature Range: - 25 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-2223-5; 935269692112; MFRC530; MFRC53T0FED

Philips Semiconductors
ISO 14443A Reader IC
1 INTRODUCTION
1.1 Scope
The MF RC531 is member of a new family of
highly integrated reader ICs for contactless
communication at 13.56 MHz. This reader IC
family utilises an outstanding modulation and
demodulation concept completely integrated for all
kinds of passive contactless communication
methods and protocols at 13.56 MHz. The MF
RC531 is pin- compatible to the MF RC500, the
MF RC530 and the SL RC400.
The Philips IC MF RC531 supports all layers of
the ISO/IEC 14443A/B communication scheme,
given correct implementation of additional
components, like oscillator, power supply, coil etc.
and provided that standardised protocols, e.g. like
ISO/IEC 14443-4 and/or ISO/IEC 14443 type B
anticollision are correctly implemented. The use of
this Philips IC according to ISO14443 Type B
might infringe third party patent rights.
The MF RC531 supports contactless
communication using MIFARE
The internal transmitter part is able to drive an
antenna designed for proximity operating distance
(up to 100 mm) directly without additional active
circuitry.
The receiver part provides a robust and efficient
implementation of a demodulation and decoding
circuitry for signals from ISO14443 compatible
transponders.
The digital part handles the complete ISO14443
framing and error detection (Parity & CRC).
Additionally it supports the fast MIFARE
security algorithm to authenticate MIFARE
Classic (e.g. MIFARE
A comfortable parallel interface, which can be
directly connected to any 8-bit µ-Processor gives
high flexibility for the reader/terminal design.
Additionally a SPI compatible interface is
supported.
A purchaser of this Philips IC has to take care
for appropriate third party patent licenses.
1.2 Features
Highly integrated analog circuitry to
demodulate and decode card response
Buffered output drivers to connect an antenna
with minimum number of external components
®
Standard) products.
®
Higher Baudrates.
®
Classic
3
1.3 Applications
The MF RC531 is tailored to fit the requirements
of various applications using contactless
communication based on ISO/IEC 14443 standard
where cost-effectiveness, small size, high
performance with a single voltage supply are
important.
Proximity operating distance (up to 100 mm)
Supports ISO 14443
Supports MIFARE
and supports MIFARE
Supports contactless communication with
higher baudrates up to 424kHz
Crypto1 and secure non-volatile internal key
memory
Pin-compatible to the MF RC500, MF RC530
and the SL RC400
Parallel µ-Processor interface with internal
address latch and IRQ line
SPI compatible interface
Flexible interrupt handling
Automatic detection of the used µ-Processor
interface type
Comfortable 64 byte send and receive FIFO-
buffer
Hard reset with low power function
Power down mode per software
Programmable timer
Unique serial number
Bit- and byte-oriented framing
Internal oscillator buffer to connect 13.56 MHz
quartz, optimised for low phase jitter
3.3 V to 5 V operation for transmitter (antenna
driver) in short range and proximity
applications
3.3 V or 5V operation for the digital part
Public transport terminals
Handheld terminals
On board units
Contactless PC terminals
Metering
Contactless public phones
Short Form Specification Rev. 3.2 April 2005
®
Dual Interface Card ICs
®
Classic protocol
MF RC531
PUBLIC