EE-SY125 Omron, EE-SY125 Datasheet - Page 3

• Manufacturer Part Number: EE-SY125
• Description: OPTO SENSOR 1MM REFLECT SMD
• Manufacturer: Omron

Specifications of EE-SY125

• Sensing Distance: 0.039" (1mm)
• Sensing Method: Reflective
• Voltage - Collector Emitter Breakdown (max): 30V
• Current - Collector (ic) (max): 20mA
• Current - Dc Forward (if): 50mA
• Output Type: Phototransistor
• Response Time: 35µs, 25µs
• Mounting Type: Surface Mount, Gull Wing
• Package / Case: 4-SMD
• Operating Temperature: -25°C ~ 85°C
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: EESY125; OR557

Precautions
I Soldering Information
Reflow soldering
• Set the reflow oven so that the temperature profile shown in the fol-
Manual soldering
• Use a soldering iron of less than 25 W, and keep the temperature of
• Solder each point for a maximum of three seconds.
• After soldering, allow the product to return to room temperature
Storage
To protect the product from the effects of humidity until the package
is opened, dry-box storage is recommended. If this is not possible,
store the product under the following conditions:
The product is packed in a humidity-proof envelope. Reflow soldering
must be done within 48 hours after opening the envelope, during
which time the product must be stored at 5 to 25°C at 60% maximum
humidity.
If it is necessary to store the product after opening the envelope, use
dry-box storage or reseal the envelope at 5 to 30°C at 70% maximum
humidity within two weeks.
Baking
If a product has remained packed in a humidity-proof envelope for six
months or more, or if more than 48 hours have lapsed since the
envelope was opened, bake the product under the following condi-
tions before use only one time:
300
lowing chart is obtained for the upper surface of the product being
soldered.
the iron tip at 260°C or below.
before handling it.
200°C
165°C max.
1 to 4°C/s
max.
Temperature: 5 to 30°C
Humidity: 70% max.
Bulk: 125°C for 16 to 24 hours
Photomicrosensor (Reflective)
120 sec. max.
1 to 4°C/s max.
Time
60 sec. max.
90 sec. max.
10 sec. max.
240°C max.
1 to 4°C/s
EE-SY125