5.49263.0140200 C&K Components, 5.49263.0140200 Datasheet - Page 5

• Manufacturer Part Number: 5.49263.0140200
• Description: LENS OPAQUE WHITE
• Manufacturer: C&K Components
• Series: RAFIX 22 QRr

Specifications of 5.49263.0140200

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *5.49263.0140200; 5.49.263.014/0200; 5.49263.014//0200; 5.49263.014/0200; 5492630140200

The new RAFIX 22QR control component
range meets all the technical requirements
and current standards for control gear.
All the components have been designed
from scratch, with a special view to
progressive design and ease of assembly.
As a result, we developed a state-of-
the-art product with an optimum cost /
benefit ratio.
Sequence of assembly / disassembly
• Fix the actuator in the front panel
• Snap the individual elements
• Insert the lamp or LED into the lamp
Approvals
ing
Part no.
1.20 124.– – –
1.20 125.– – –
1.30 243.– – –
1.71 213.– – –
1.71 214.– – –
with the ring nut.
(a maximum three contact blocks or
two contact blocks together with a
lamp socket) in the coupling. You can
install them on any assembling axis.
socket.
30.00
zert.
BG
Panel cut-out according to IEC 947
All actuators are provided with a locating
lug which may be removed using a
screwdriver for installation into mounting
holes if required.
With a grid spacing of 30 mm horizontally
and 50 mm vertically, the collars of the
square actuators touch each other. We
recommend to use the same grid spacing
also for the round collar shapes (IEC 947).
The system is of modular design. Actuators,
contact blocks and lamp sockets can be
combined freely. This means that
you may implement modifications
of design or configuration even
at the last minute. An additional
positive effect is the reduction
of stockholding costs.
• Snap the coupling with the
• Connect the cables.
• Disassembly is performed in
contact blocks on to the actuator.
reverse order. To remove the
coupling from the actuator, the
latch lever must be pressed
(by hand or with a screwdriver).
0660
VDE
10/15
= Approved,
ULc
5
Assembly
All dimensions given in this
catalogue are in mm!
= Approval pend-
Disassembly
GL