RI-23AA Coto Technology, RI-23AA Datasheet - Page 2

• Manufacturer Part Number: RI-23AA
• Description: SWITCH MAGNETIC .5A 14-23AT
• Manufacturer: Coto Technology
• Series: RI-23r
• Type: Glass Bodyr

Specifications of RI-23AA

• Circuit: SPST-NO
• Must Operate: 14 ~ 23AT
• Must Release: 7.5 ~ 17.5AT
• Switching Current (dc) (max): 500mA
• Switching Voltage (dc) (max): 200V
• Switching Power (max): 10W
• Magnet: Not Specified
• Mounting Type: Non-Standard (Axial)
• Termination Style: Axial (2 Leads)
• Switch Type: Dry-Reed
• Contact Form: SPST - NO
• Contact Rating: 500 mAmps
• Magnet Type: Electromagnet
• Operate Range: 14 At to 23 At
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 306-1086; RI23AA

Vibration
The switches are tested in accordance with “IEC 68-2-
6”, test Fc (acceleration 10G; below cross-over fre-
quency 57 to 62 Hz; amplitude 0.75 mm;
frequency range 10 to 2000 Hz, duration 90 minutes).
Such a vibration will not cause an open switch (no
magnetic field present) to close, nor a switch kept
closed by an 80 AT coil to open.
Mechanical Strength
The robustness of the terminations is tested in accor-
dance with “IEC 68-2-21”, test Ua
Operating and Storage Temperature
Operating ambient temperature; min: -55°C;
max: +125°C. Storage temperature; min: -55°C; max:
+125°C. Note: Temperature excursions up to 150°C
may be permissible. For more information contact your
nearest Coto Technology sales office.
Soldering
The switch can withstand soldering heat in accordance
with “IEC 68-2-20”, test Tb, method 1B:solder bath at
350 ±10 °C for 3.5 ±0.5 s. Solderability is tested in
RI-23 Series Dry Reed Switch
For Most Recent Data, Consult the Coto Technology Website:
1
(load 40 N).
www.cotorelay.com
accordance with “IEC 68-2-20”, test Ta, method 3:
solder globule temperature 235°C; ageing 1b: 4 hours
steam.
Welding
The leads can be welded.
Mounting
The leads should not be bent closer than 1 mm to the
glass-to-metal seals. Stress on the seals should be
avoided. Care must be taken to prevent stray magnetic
fields from influencing the operating and measuring
conditions.
6
E-mail: [e-mail]
109