SP6201EM5-L-3-0 Exar Corporation, SP6201EM5-L-3-0 Datasheet - Page 8

• Manufacturer Part Number: SP6201EM5-L-3-0
• Description: Linear Regulators - Standard Micropower, 200mA CMOS LDO Regulators
• Manufacturer: Exar Corporation
• Series: -r

Specifications of SP6201EM5-L-3-0

• Polarity: Dual
• Output Type: Adjustable
• Dropout Voltage (max): 500 mV
• Input Voltage Max: 7 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Voltage Regulation Accuracy: 2 %
• Package / Case: SOT-23
• Regulator Topology: Positive Fixed
• Voltage - Output: 3V
• Voltage - Input: Up to 6V
• Voltage - Dropout (typical): 0.32V @ 200mA
• Number Of Regulators: 1
• Current - Output: 200mA
• Current - Limit (min): 300mA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

equation:
Substituting P
operating conditions that are critical to the ap-
plication will give the maximum operating con-
ditions for the regulator circuit. For example, if
we are operating the SP6201- 3.0V at room
temperature, with a SOT-23-5 package on a 4
layer standard board we can determine the maxi-
mum input voltage for a set output current.
To prevent the device from entering thermal
shutdown, maximum power dissipation can not
be exceeded. Using the output voltage of 3.0V
and an output current of 200 mA, the maximum
input voltage can be determined. Ground pin
current can be taken from the electrical spec’s-
table (I
mum input voltage is determined as follows:
Solving for V
After calculations, we find that the maximum
input voltage of a 3.0V application at 200mA of
output current in an SOT-23-5 package is 5.59V.
Dual-Supply Operation
When used in dual supply systems where the
regulator load is returned to a negative supply,
the output voltage must be diode clamped to
ground.
Date: 5/19/06 Rev B
0.52W = (V
P
P
D
GND
D(max)
= (V
V
=200uA at I
IN
≅ (V
IN
=
IN
IN
= (125°C -25°C) = 0.52W
D(max)
– 3.0V)*200mA + V
, we get:
- V
IN
(191°C/W)
(0.52W + 0.6W)
OUT
- V
for P
OUT
200.2mA
)*I
OUT
OUT
D
=200mA). The maxi-
) * I
and solving for the
+ V
OUT
IN
*I
IN
GND
SP6200/6201 100/200mA CMOS LDO Regulor
*0.2mA
8
THEORY OF OPERATION: Continued
Copyright 2008 Sipex Corporation