HR30-SC-211 Hirose Electric Co Ltd, HR30-SC-211 Datasheet - Page 11

• Manufacturer Part Number: HR30-SC-211
• Description: CONN CONTACT FEMALE CRIMP
• Manufacturer: Hirose Electric Co Ltd
• Series: HR30r

Specifications of HR30-SC-211

• Pin Or Socket: Socket
• Wire Gauge: 26-30 AWG
• Contact Termination: Crimp
• Contact Finish: Gold
• Product Type: Contacts
• Contact Style: Socket (Female)
• Number Of Contacts: 1
• Mounting Style: Wire
• Termination Style: Crimp
• Contact Plating: Gold
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: HR597 - CONN JACK 12POS FEMALE CRIMPHR592 - CONN RECEPT 12POS FEMALE CRIMPHR585 - CONN PLUG 12POS FEMALE CRIMPHR584 - CONN PLUG 10POS FEMALE CRIMPHR874 - CONN JACK 12POS FEMALE CRIMP
• Size: -
• Contact Finish Thickness: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: HR30SC211; HR881TR

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Note: Loctite is a registered trademark of the Henkel Loctite Corporation.
3
1. To prevent accidental loosening of the back shell it is recommended that a small amount of primer (Loctite® 7649) and
2. Keeping the terminated insulator body on the fixture, re-assembly the plug in order shown.
4. Using the correct back-tightening collar tighten the back shell to the specified torque.
5. Remove the assembly from the fixture.
adhesive (Loctite® 271) be applied to the threads of the insulator body before proceeding.
When tightening the collar make sure that the cable will NOT turn.
Connector
10 and 12 Pos.
3 and 6 Pos.
Back shell tightening collar size
16 mm
18 mm
Torque
11