133-3403-001 Emerson Network Power, 133-3403-001 Datasheet - Page 2

• Manufacturer Part Number: 133-3403-001
• Description: CONN MCX PLUG STRAIGHT RG316 GOL
• Manufacturer: Emerson Network Power
• Series: MCXr
• Type: Cable Plugr

Specifications of 133-3403-001

• Connector Style: MCX
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Snap-On
• Cable Group: RG-161, 174, 188, 316
• Frequency - Max: 6GHz
• Frequency-max: 6GHz
• Body Style: Straight
• Cable Type: RG 188/U, 316, 161, 174
• Features: Captivated Contact
• Frequency Range: 0 GHz to 6 GHz
• Housing Material: Brass
• Mounting Angle: Straight
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: MCX
• Product: Various Connectors
• Gender: Male
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Crimp
• Maximum Frequency: 6 GHz
• Angle: Straight
• Finish, Housing: Gold
• Frequency: 0 to 6 GHz
• Material, Contact: Brass
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: MCX
• Special Features: Captivated Contact
• Termination: Crimp
• Voltage, Rating: 335 V
• Plating: Gold Over Brass Except Where Noted
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1333403001; J533

Assembly
Instructions
2
MCX SOLDER TYPE STRAIGHT PLUG
FOR SEMI-RIGID CABLE
Johnson Components
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not
3. Place center contact on center conductor
4. Insert contact and cable into body assembly
nick center conductor.
making sure contact bottoms against cable
insulation. Solder center conductor to
center contact through solder hole. Solder
must not be allowed to run on outside of
contact. Use a minimum amount of solder
for a good joint. .020 (0.51) diameter
solder is recommended. Trim excess
insulation.
making sure cable is bottomed against
insulator in body. Solder body to cable. Use
a minimum amount of heat to minimize
cable insulation movement.
CABLE GROUP
(.086 semi-rigid)
RG 405/u
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
PART NUMBER
133-3693-001
133-3693-006
INCHES (MILLIMETERS)