036880 Q10 (SAK4) Weidmuller, 036880 Q10 (SAK4) Datasheet
036880 Q10 (SAK4)
Manufacturer Part Number
036880 Q10 (SAK4)
Description
JUMPER KIT, 10WAY
Manufacturer
Weidmuller
Series
SAK4r
Datasheet
1.036880_Q10_SAK4.pdf
(2 pages)
Specifications of 036880 Q10 (SAK4)
Accessory Type
Jumper
No. Of Positions
10
Svhc
No SVHC (15-Dec-2010)
Connector Type
Jumper (Busbar)
No. Of Ways
10
For Use With
SAK4 Terminals
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
I
Cross-connection systems
Cross-connections across more than
10 modular terminals
The SAKD 2.5 N, SAK 2.5, SAK 4 and
SAK 6 N terminals include the option of
setting up a cross-connection with more
than 10 poles, e.g. 20-pole:
2 No. Q 10 + 1 No. QL 2.
The end fixing screws are removed from
the Q 10 links by unscrewing them from
the VH sleeves. The QL 2 is positioned
between these and the two fixing screws
screwed into their VH sleeves again. This
arrangement allows 20 poles to be cross-
connected.
I.8
Potential distribution
Q pre-assembled cross-connectors
The pre-assembled cross-connector
has the appropriate number of cross-
connection links, cross-connection
sleeves and fixing screws to match the
number of poles required already installed
in a captive arrangement. Such pre-
assembled cross-connectors merely
have to be inserted into the appropriate
terminals during installation. These cross-
connectors can be supplied in 2-, 3-, 4-
and 10-pole versions.
QL cross-connection links
Cross-connection links are used to
provide cross-connections with equal
potential across several modular
terminals. The cross-connection links
are made from copper or brass with an
electroplated tin coating, and can be
supplied in lengths to suit 2, 3, 4 and
10 poles, to match the respective terminal
width. The electrical connection between
the cross-connection link and the busbar
of the modular terminal is by way of a
connecting sleeve.
BS fixing screws
A steel fixing screw is used to connect
the cross-connection link to the
connecting sleeve on the busbar under
a modular terminal. It is the purpose of
the steel screw to provide a secure
mechanical fixing between the cross-
connection and the busbar. Two types
of screw are used: form A has a full-
length thread, and form B has a plain
shaft below the head with a captive
washer.
VH connecting sleeves
The length of the connecting sleeve is
matched to the size of the terminal. The
sleeves are made from tin-coated copper
or brass. One connecting sleeve must
be used for every terminal to be cross-
connected.
Related parts for 036880 Q10 (SAK4)
036880 Q10 (SAK4) Summary of contents
Page 1
Potential distribution Cross-connection systems Cross-connections across more than 10 modular terminals The SAKD 2.5 N, SAK 2.5, SAK 4 and SAK 6 N terminals include the option of setting up a cross-connection with more than 10 poles, e.g. 20-pole: 2 ...
Page 2
Potential distribution Cross-connection systems Q QL Rated Pre-assembled Cross-connection links current cross-connection of modular terminals Type Type Type A Poles Order No. Poles Order No. SAK 2 0370000000 3710000000 ...