DSPIC30F2012-30I/ML Microchip Technology, DSPIC30F2012-30I/ML Datasheet - Page 3

• Manufacturer Part Number: DSPIC30F2012-30I/ML
• Description: IC, DSC, 16BIT, 12KB, 40MHZ, 5.5V, QFN28
• Manufacturer: Microchip Technology
• Series: DsPIC30Fr

Specifications of DSPIC30F2012-30I/ML

• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 20
• Flash Memory Size: 12KB
• Supply Voltage Range: 2.5V To 5.5V
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 20
• Program Memory Size: 12KB (4K x 24)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 10x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Package: 28QFN EP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 12
• Interface Type: I2C/SPI/UART
• On-chip Adc: 10-chx12-bit
• Number Of Timers: 3
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT28QFN4 - SOCKET TRANS ICE 28QFN W/CABLEAC164322 - MODULE SOCKET MPLAB PM3 28/44QFNDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: DSPIC30F201230IML

High-Performance Modified RISC CPU:
• Modified Harvard architecture
• C compiler optimized instruction set architecture
• Flexible addressing modes
• 83 base instructions
• 24-bit wide instructions, 16-bit wide data path
• Up to 24 Kbytes on-chip Flash program space
• Up to 2 Kbytes of on-chip data RAM
• Up to 1 Kbytes of nonvolatile data EEPROM
• 16 x 16-bit working register array
• Up to 30 MIPS operation:
• Up to 21 interrupt sources:
DSP Features:
• Dual data fetch
• Modulo and Bit-Reversed modes
• Two 40-bit wide accumulators with optional
• 17-bit x 17-bit single-cycle hardware fractional/
• All DSP instructions are single cycle
• single-cycle ±16 shift
© 2008 Microchip Technology Inc.
Note:
- DC to 40 MHz external clock input
- 4 MHz - 10 MHz oscillator input with
- 8 user-selectable priority levels
- 3 external interrupt sources
- 4 processor trap sources
saturation logic
integer multiplier
- Multiply-Accumulate (MAC) operation
PLL active (4x, 8x, 16x)
This data sheet summarizes features of
this group of dsPIC30F devices and is not
intended to be a complete reference
source. For more information on the CPU,
peripherals, register descriptions and gen-
eral device functionality, refer to the
“dsPIC30F Family Reference Manual”
(DS70046). For more information on the
device instruction set and programming,
refer to the “dsPIC30F/33F Programmer’s
Reference Manual” (DS70157).
High-Performance, 16-bit Digital Signal Controllers
dsPIC30F2011/2012/3012/3013
Peripheral Features:
• High-current sink/source I/O pins: 25 mA/25 mA
• Three 16-bit timers/counters; optionally pair up
• 16-bit Capture input functions
• 16-bit Compare/PWM output functions
• 3-wire SPI modules (supports four Frame modes)
• I
• Up to two addressable UART modules with FIFO
Analog Features:
• 12-bit Analog-to-Digital Converter (ADC) with:
• Programmable Low-Voltage Detection (PLVD)
• Programmable Brown-out Reset
Special Microcontroller Features:
• Enhanced Flash program memory:
• Data EEPROM memory:
• Self-reprogrammable under software control
• Power-on Reset (POR), Power-up Timer (PWRT)
• Flexible Watchdog Timer (WDT) with on-chip
• Fail-Safe Clock Monitor operation:
• Programmable code protection
• In-Circuit Serial Programming™ (ICSP™)
• Selectable Power Management modes:
CMOS Technology:
• Low-power, high-speed Flash technology
• Wide operating voltage range (2.5V to 5.5V)
• Industrial and Extended temperature ranges
• Low-power consumption
16-bit timers into 32-bit timer modules
and 7-bit/10-bit addressing
buffers
- 200 ksps conversion rate
- Up to 10 input channels
- Conversion available during Sleep and Idle
- 10,000 erase/write cycle (min.) for
- 100,000 erase/write cycle (min.) for
and Oscillator Start-up Timer (OST)
low-power RC oscillator for reliable operation
- Detects clock failure and switches to on-chip
- Sleep, Idle and Alternate Clock modes
2
C™ module supports Multi-Master/Slave mode
industrial temperature range, 100K (typical)
industrial temperature range, 1M (typical)
low-power RC oscillator
DS70139F-page 3