PIC18F4455-I/ML Microchip Technology, PIC18F4455-I/ML Datasheet - Page 2

• Manufacturer Part Number: PIC18F4455-I/ML
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,LLCC,44PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4455-I/ML

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 24KB (12K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, I2C, EAUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 4
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM163025
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT44QFN2 - SOCKET TRAN ICE 44QFN/40DIPAC164322 - MODULE SOCKET MPLAB PM3 28/44QFNI3-DB18F4550 - BOARD DAUGHTER ICEPIC3DM163025 - PIC DEM FULL SPEED USB DEMO BRD444-1001 - DEMO BOARD FOR PICMICRO MCU
• Lead Free Status / Rohs Status: Details

PIC18F2455/2550/4455/4550
4. Module: Interrupts
EXAMPLE 1:
DS80220J-page 2
ISR @ 0x0008
Foo:
CALL Foo, FAST; store current value of WREG, BSR, STATUS for a second time
POP
:
:
RETFIEFAST
If an interrupt occurs during a two-cycle instruction
that modifies the STATUS, BSR or WREG register,
the unmodified value of the register will be saved
to the corresponding Fast Return (Shadow)
register and upon a fast return from the interrupt,
the unmodified value will be restored to the
STATUS, BSR or WREG register.
For example, if a high priority interrupt occurs
during the instruction, MOVFF TEMP, WREG, the
MOVFF instruction will be completed and WREG
will be loaded with the value of TEMP before
branching to ISR. However, the previous value of
WREG will be saved to the Fast Return register
during ISR branching. Upon return from the
interrupt with a fast return, the previous value of
WREG in the Fast Return register will be written to
WREG. This results in WREG containing the value
it had before execution of MOVFF TEMP, WREG.
Affected instructions are:
MOVFF Fs, Fd
where Fd is WREG, BSR or STATUS;
MOVSF Zs, Fd
where Fd is WREG, BSR or STATUS; and
MOVSS [Zs], [Zd]
where the destination is WREG, BSR or STATUS.
; clears return address of Foo call
; insert high priority ISR code here
Work around
1. Assembly Language Programming:
a) If any two-cycle instruction is used to modify
b) As another alternative, the following work
Date Codes that pertain to this issue:
All engineering and production devices.
the WREG, BSR or STATUS register, do not
use the RETFIE FAST instruction to return
from the interrupt. Instead, save/restore
WREG, BSR and STATUS via software per
Example 9-1 in the Device Data Sheet. Alter-
natively, in the case of MOVFF, use the MOVF
instruction to write to WREG instead. For
example, use:
MOVF
MOVWF
instead of: MOVFF TEMP, BSR.
around shown in Example 1 can be used.
This example overwrites the Fast Return
register by making a dummy call to Foo with
the fast option in the high priority service
routine.
TEMP, W
BSR
© 2008 Microchip Technology Inc.