DC60MP OPTO 22, DC60MP Datasheet - Page 3

• Manufacturer Part Number: DC60MP
• Description: SSR, PCB MOUNT, 60VDC, 32VDC, 3A
• Manufacturer: OPTO 22

Specifications of DC60MP

• Control Voltage Type: DC
• Input Voltage: 3VDC To 32VDC
• Load Current: 3A
• Load Voltage Range: 5VDC To 60VDC
• Relay Terminals: Through Hole
• Peak Reflow Compatible (260 C): No
• Supply Voltage: 60VDC
• Brand/series: DC Series
• Capacitance: 8 pF (Max.) Coupling (Input-Output)
• Current, Rating: 3 A
• Current, Surge, Non-repetitive Peak: 5 A @ 1 Sec.
• Dimensions: 1.7 in. L x 0.4 in. W x 0.98 in. H
• Function: General Purpose
• Mounting Type: PCB
• Number Of Pins: 4
• Relay Type: Solid State
• Standards: UL, CSA
• Temperature, Operating, Maximum: 100 °C
• Temperature, Operating, Minimum: -40 °C
• Timer Type: Off Delay
• Voltage, Control: 60 VDC
• Output Current: 3A
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Power Series SSR Accessories
Safety Cover
A plastic safety cover (Opto 22 part number SAFETY COVER) is
available for use with Opto 22 Power Series SSRs. The safety
cover reduces the chance of accidental contact with relay
terminals, while providing access holes for test
instrumentation.
SSR-HS Heatsink
Custom designed for the Power Series SSRs, the SSR-HS
heatsink provides excellent heat dissipation when mounted to
the SSR with a matching thermal conductive pad, which is
used in place of silicon grease. One thermal pad is included
with the heatsink. Additional pads may be purchased in packs
of 10 (part number SSR-THERMOPAD).
Thermal Ratings
The thermal ratings shown in the following graphs were
obtained with an SSR attached to a heatsink using a thermal
conductive pad.
45 Amp Relay on SSR-HS Heatsink Derating
© 2006–2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
An optional plastic safety cover can be installed on a Power Series SSR.
Solid-State Relays
30
25
20
15
10
5
20
V: Heatsink mounted to a vertical surface
H: Heatsink mounted to a horizontal surface.
30
Ambient Temperature (°C)
V
40
800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] •
50
60
H
70
80
90 100
25 Amp Relay on SSR-HS Heatsink Derating
Heatsink Assembly
Before attaching the SSR, remove the protective film from
both sides of the thermal pad, then place the pad on the
heatsink making sure to align the holes. Secure the SSR to the
heatsink with the two 8-32 x 3/8˝ panhead Phillips screws
included in the kit. Use 20 in-lb (2.26 N-m) of torque.
NOTE: To take advantage of the
cooling effect of natural air flow,
mount the SSR/heatsink assembly to
a vertical surface with the Opto 22
logo right side up as shown here.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
30
25
20
15
10
V: Heatsink mounted to a vertical surface
H: Heatsink mounted to a horizontal surface.
5
20
800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
30
Ambient Temperature (°C)
V
40
50
Screws
60
Thermal conductive pad
Power Series SSR
(not included)
H
Heatsink
70
80
90 100
PAGE
3