AMN24112 Panasonic Electric Works, AMN24112 Datasheet - Page 24

• Manufacturer Part Number: AMN24112
• Description: SENSOR MOTION ANA 10M 5V WHT PCB
• Manufacturer: Panasonic Electric Works
• Series: NaPiOn™r

Specifications of AMN24112

• Sensing Distance: 32.80' (10m)
• Sensor Type: Passive Motion
• Sensing Object: *
• Response Frequency: *
• Material - Body: *
• Shielding: *
• Voltage - Supply: 4.5 V ~ 5.5 V
• Output Type: Analog
• Terminal Type: PC Pin
• Package / Case: Radial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 255-1818; AMN24112

1. Ambient operating conditions
2. Concerning external surge voltages
1) Temperature: Refer to the absolute maximum ratings
2) Humidity: 15% to 85% RH (No freezing nor condensa-
3) Atmospheric pressure: 86 to 106 kPa
4) The sensors do not have a water-proof or dust-proof
5) Take care to avoid exposing the sensors to heat, vibra-
Since the internal circuitry may be destroyed if an exter-
nal surge voltages is supplied, provide an element which
will absorb the surges. The levels of the voltage surges
which the sensor can withstand is given below.
MA motion sensors: 500 V (±1.2 x 50µs unipolar full-
wave voltage)
MP motion sensors: Within the supply voltage given in
the absolute maximum ratings.
Head the following precautions to prevent injury or accidents.
• Do not use these sensors under any circumstances in
• Before connecting a connector, check the pin layout by
which the range of their ratings, environment conditions
or other specifications are exceeded. Using the sen-
sors in any way which causes their specifications to be
exceeded may generate abnormally high levels of heat,
emit smoke, etc., resulting in damage to the circuitry
and possibly causing an accident.
referring to the connector wiring diagram, specifications
diagram, etc., and make sure that the connector is con-
nected properly. Take note that mistakes made in con-
nection may cause unforeseen problems in operation,
generate abnormally high levels of heat, emit smoke,
etc., resulting in damage to the circuitry.
for the temperature of each individual sensor.
tion at low temperature)
construction. Depending on the ambient operating con-
ditions, some means of providing protection from water
and dust and preventing the formation of ice and con-
densation must be provided prior to using the sensors.
tion or impact since malfunctioning may result.
SAFETY PRECAUTIONS
Notes for Motion Sensor
3. Concerning power supply-superimposed noise
4. Drop damage
5. Concerning the circuit sides
6. The technical information contained in this catalog is
• Do not use any motion sensor which has been disas-
• The sensor has two malfunction modes: short circuit
The short circuit mode may be triggered by an increase
in temperature. In order to ensure safety, especially in
important applications, please consider suitable safety
measures such as a protective circuit or protection
device.
– Various safety machines and devices
– Traffic signal lights
– Crime and disaster prevention devices
– Control devices and other devices that concern the
– Other important devices
sembled or remodeled.
and open.
Use a regulated power supply as the power supply.
Otherwise, power supply-superimposed noise may cause
the sensors to malfunction. The levels of noise which the
sensor can withstand is given below.
MA motion sensors: ±200 V (50ms, 1µs wide square
waves)
MP motion sensors: ±20 V (50ms, 1µs wide square
waves)
If the sensor is dropped, damage can occur resulting in
incorrect operation. If dropped, be sure to do a visual
check of the exterior for noticeable damage and check
the operation characteristics for faulty operation.
Since the circuit sides given in this catalog are not pro-
tected in terms of circuit design, check out the perfor-
mance and reliability of the circuits prior to using the sen-
sors.
used to explain general operation and use of the
products. By this usage, neither our company nor
any third party grants the right to use intellectual
property copyrights or any other copyrights.
safety of trains and vehicles.