APDS-9006-020 Avago Technologies US Inc., APDS-9006-020 Datasheet - Page 10

• Manufacturer Part Number: APDS-9006-020
• Description: AMBIENT LIGHT SENSOR 4CHIPLED
• Manufacturer: Avago Technologies US Inc.
• Type: Ambient Light Photo Sensorr

Specifications of APDS-9006-020

• Peak Wavelength: 500 nm
• Maximum Light Current: 52 uA
• Maximum Dark Current: 300 nA
• Maximum Rise Time: 5 ms
• Maximum Fall Time: 5 ms
• Package / Case: Chip LED-4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Product: Ambient Light Sensor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-1718-2

Appendix A: SMT Assembly Application Note
1.0 Solder Pad, Mask and Metal
Figure A1. Stencil and PCBA
1.1 Recommended Land Pattern
Figure A2. Recommended Land Pattern
0
Solder
Aperture
Opening
Aperture
Mask
Stencil
0.945
0.60
Unit: mm
Tolerance: +/- 0.2
1.00
0.50
2.00
C L
0.60
Soldering
Terminal
Aperture Opening
0.71
1.89
0.71
Metal Stencil
For Solder
Paste Printing
Land
Pattern
PCBA
Figure A4. Adjacent land keepout and solder mask areas.
1.2 Recommended Metal Solder Stencil Aperture
It is recommended that a 0.11 mm (0.004 inches) thick
stencil be used for solder paste printing. Aperture
opening for shield pad is 0.6mm x 0.71mm. This is to
ensure adequate printed solder paste volume and no
shorting.
Figure A3. Solder stencil aperture
1.3 Adjacent Land Keep-out and Solder Mask Areas
Adjacent land keep-out is the maximum space occupied
by the unit relative to the land pattern. There should be
no other SMD components within this area.
The minimum solder resist strip width required to avoid
solder bridging adjacent pads is 0.2 mm.
Note: Wet/Liquid Photo-Imageable solder resist/mask is recommended.
Mounting
Center
Unit: mm
3.31
Aperture
Opening
2.7
Unit: mm
0.2 MIN.
4.31
1.7
0.11