D10DPFP BANNER ENGINEERING, D10DPFP Datasheet - Page 6

• Manufacturer Part Number: D10DPFP
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Dual Discrete Outputr

Specifications of D10DPFP

• Sensor Output: PNP
• Sensor Input: Fiber Optic
• Output Type: Transistor
• Contact Current Max: 150mA
• Switch Terminals: Connector
• Body Style: Rectangular
• Brand/series: Expert™
• Current, Switching: 150 mA
• Function: Fiber Optic
• Indicator: LCD
• Ip Rating: IP50
• Material, Casing: Black ABS⁄Polycabonate Alloy (Housing)
• Material, Cover: Polycarbonate
• Mounting Type: DIN Rail
• Output: PNP
• Primary Type: Photoelectric
• Sensing Mode: Selectable
• Technology: Photoelectric
• Temperature, Operating: -20 to +55 °C
• Termination: Cable
• Time, Response: 50 μs, 200 μs, 1 ms, 2.5 ms
• Voltage, Supply: 24 VDC
• Accessories Available: Cordsets and Plastic Fiber Optic Cable
• Fiber Optic Sensor Type: Dual Discrete Output
• Lead Free Status / Rohs Status: RoHS Exempt Product

D10 Expert
• S ets a single ON condition that extends 200 counts above and below the taught condition
• All other conditions (lighter or darker) result in OFF output
Window SET is most useful when a product may not always appear in the same place, or
when other signals may appear. Window SET designates a sensing window, with the Output
ON condition inside the window, and the Output OFF conditions outside the window (see
Figure 6). The sensor accepts a single sensing condition, and adds switching thresholds and
hysteresis above and below that condition to create a sensing window. Output ON and OFF
conditions can be reversed by changing Light/Dark Operate status in SETUP mode.
Window SET and Manual Adjust
Using Manual Adjust with Window SET expands or contracts the size of the window.
6
• S ensing window (sensitivity) is adjustable using “+” and “-” buttons (see Manual Adjust,
(including ±100 counts hysteresis)
page 9)
P/N 64154 rev. F
• P ress and hold
• P resent sensing
• D ouble-click the
Static (-) button
> 2 seconds.
condition.
Static button.
™
Push Button
Dual Discrete Outputs
Single-Point Window SET
T
T
• Present sensing condition.
• Single-pulse
• Double-pulse
T
the remote line.
the remote line.
T
T
0.04 sec. ≤ T ≤ 0.8 sec.
T
Remote
T
T
T
T
T
T
T
T
T
T
• Display flashes “1st”
• Arrow icon turns red
• Display flashes “2nd”
• Arrow icon turns red
TEACH conditions acceptable:
• Display flashes “sngl,”
then “pt” twice
• Sensor returns to RUN
• Arrow icon turns green
TEACH conditions unacceptable:
• Display flashes “fail” and
returns to “1st”
• Arrow icon remains red
• After 60 seconds, sensor
mode with new settings.
returns to RUN mode
(Arrow icon turns green)
without changing settings.
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
Figure 6. Single-Point Window SET and
(no signal)
Darkest
Output OFF
T
T
T
Hysteresis (Light Operate shown)
100 counts
Hysteresis
T
Result
Sensing window size adjusted by
± 100 counts from the
presented condition
window thresholds
Sensor positions
Manual Adjust
200 counts
Output ON
Condition
•
Taught
Minneapolis, MN U.S.A.
100 counts
Hysteresis
Output OFF
Most Light
(saturated
signal)