D10UNFPQ BANNER ENGINEERING, D10UNFPQ Datasheet - Page 12

• Manufacturer Part Number: D10UNFPQ
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Analog And Discrete Outputr

Specifications of D10UNFPQ

• Sensor Output: NPN
• Sensor Input: Fiber Optic
• Output Type: Transistor
• Contact Current Max: 150mA
• Switch Terminals: Quick Connect
• Brand/series: D10 Expert™
• Current, Switching: 150 mA
• Function: Fiber Optic
• Ip Rating: IP50
• Mounting Type: DIN Rail
• Output: NPN/Voltage
• Primary Type: Photoelectric
• Sensing Mode: Selectable
• Technology: Photoelectric
• Termination: 6-Wire Connector
• Voltage, Supply: 24 VDC
• Accessories Available: Cordsets and Plastic Fiber Optic Cable
• Fiber Optic Sensor Type: Analog And Discrete Output

In the unlikely event that the setup parameters are lost or become corrupt, the display
will continuously scroll: “USEr PSF Error.” Reteach the sensor to recover. If the
problem persists, contact your Banner representative for further information.
The pink wire is configured as a gate input. When this wire is pulled low (i.e., to the
sensor ground), it inhibits the outputs from switching, while all other sensor functions
continue to be enabled. This feature is useful for controlling when the outputs are
allowed to change states. Gate input function response time is 1 millisecond.
D10 Expert
12
P/N 65448 rev. E
™
Analog and Discrete Outputs
Self-Diagnostic Error Modes
Gate Input
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
•
Minneapolis, MN U.S.A.