6210 3M, 6210 Datasheet - Page 20

• Manufacturer Part Number: 6210
• Description: COUPLING F/OPTIC FC MM
• Manufacturer: 3M

Specifications of 6210

• Convert From (adapter End): FC Simplex Receptacle
• Convert To (adapter End): FC Simplex Receptacle
• Mode: Multimode
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined
• Features: -
• Mounting Type: -
• Other names: 5400770872; 6210 COUPLING FC; 80-6105-6923-0; 80610569230; MF6210

10.10 Place the jig on the lapping film.
10.14 Clean the connector end face
10.17 Good polish (single-mode)
10.20 Too much pressure when scribing.
with a lint free cloth moistened
with isopropyl alcohol.
10.11 Place the ferrule in the jig
10.15 Inspect the connector end
10.18 Good polish (multimode)
10.21 Scribed fiber was too long
10.13 Beginning with a light pressure, move the jig in a figure eight pattern. The
Note: The jig will feel much easier to push immediately after the adhesive has
until it stops.
face with the view scope.
and broke during polishing or
too much downward pressure
during polishing.
speed of your figure eights should be between one and two per second.
After you have done 5 figure eights, increase to a medium pressure and
polish until all of the adhesive has been removed. Then, polish an
additional 3 figure eights.
been removed.
20
10.12 Hold the connector as shown.
10.16 Turn on the light and adjust
10.19 Needs more polishing.
10.22 ST ConnectorÑInstall the
the focus.
boot on the connector.