ST-PA6 RADIO DESIGN LABS, ST-PA6 Datasheet - Page 2
ST-PA6
Manufacturer Part Number
ST-PA6
Description
RDL SIX-WATT UTILITY AMPLIFIER, FREQUENCY RESPONSE: 35 HZ-20 KHZ, THD: .35 %, INPUT: 10 KOHM, 400 MV (LINE LEVEL), POWER REQUIREMENTS: 24-33 VDC, 350 MA, GROUND REFERENCED, NUMBER OF CHANNELS: 1
Manufacturer
RADIO DESIGN LABS
Datasheet
1.ST-PA6.pdf
(2 pages)
STICK-ON
Model ST-PA6
Audio Power Amplifier
TYPICAL PERFORMANCE
Inputs:
Input Level:
Freq. Response:
THD:
Noise:
Output:
Equalization:
Power:
891-0007J
®
SERIES
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Radio Design Labs Technical Support Centers
2 @ 100 kΩ balanced (may be wired unbalanced, inputs equally combined)
400 mV (RMS) minimum (for rated power output)
35 Hz to 30 kHz (+/- 1.5 dB w/EQ setting flat)
< 0.350%
< -60 dB
8 Ω unbalanced, 6 watts RMS
Single-turn adjustment:
Flat to +5 dB @ 60 Hz (center frequency of boost)
Flat to +4 dB @ 100 Hz
Flat to +3 dB @ 120 Hz
24 to 33 Vdc @ 350 mA, Ground referenced
Installation/Operation
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.
Related parts for ST-PA6
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
RDL AUDIO DISTRIBUTION AMPLIFIER, POWER REQUIREMENTS: 24-30 VDC FLOATING OR 12-15 VDC BIPOLAR SUPPLY, 50 MA, APPLICATIONS: DISTRIBUTION WITH UP TO 3 OUTPUTS, BRIDGING A LINE FOR LOCAL DISTRIBUTION, DISTRIBUTION WITH IMPEDANCE CONVERS
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL UNIVERSAL AUDIO MIXER, POWER REQUIREMENTS: 24-33 VDC, 60 MA, APPLICATIONS: MIXING OF TWO AUDIO SOURCES. CONVERTS MONO LINE LEVEL SIGNALS FROM CONSUMER TO PROFESSIONAL, OR FROM PROFESSIONAL TO CONSUMER FORMAT
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL LINE LEVEL MIXING AMPLIFIER, POWER REQUIREMENTS: 24-30 VDC FLOATING OR 12-15 VDC BIPOLAR, 55 MA, NUMBER OF CHANNELS: 3, GAIN: -14- DB, FEATURES: OUTPUTS FROM MULTIPLE UNITS MAY BE CONNECTED IN PARALLEL TO FORM A MULTI CHANNEL MIX
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL TWO-WATT UTILITY AMPLIFIER, NUMBER OF OUTPUTS: 2, FREQUENCY RESPONSE AT 600 OHM: 20 HZ-30 KHZ, FREQUENCY RESPONSE AT 8 OHM: 35 HZ-30 KHZ, THD: .5 %, INPUT: 10 KOHM, -15 DBV (LINE LEVEL), POWER REQUIREMENTS: 24-33 VDC, 150 MA, GRO
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL AUTOMATIC LEVEL CONTROL, POWER REQUIREMENTS: 24 VDC, 80 MA, IMPEDANCE: 10 KOHM, TERMINAL TYPE: SCREW, FEATURES: IT MAINTAINS A CONSISTENT DBU OUTPUT FOR INPUT SIGNAL VARIATIONS AS GREAT AS 25 DB
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL POWER SUPPLIES, OUTPUT CURRENT: 400 MA, OUTPUT VOLTAGE: 24 VDC, FEATURES: SINGLE ENDED, DESIGNED SPECIFICALLY FOR USE WITH ALL RDL MODULES
Manufacturer:
RADIO DESIGN LABS
Part Number:
Description:
RDL AUDIO DISTRIBUTION AMPLIFIER, GAIN: -15- DB, FEATURES: INPUT AND OUTPUT CONNECTIONS ARE MADE VIA A FULL SIZE SCREW TERMINAL STRIP, ON THE REAR PANEL AND ACCEPT ANY COMBINATION OF BALANCED OR UNBALANCED WIRING CONFIGURATIONS
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL ELECTRONIC TRANSFORMER PAIR, POWER REQUIREMENTS: 24-30 VDC FLOATING OR 12-15 VDC BIPOLAR, CURRENT RATING: 50 MA, NUMBER OF CHANNELS: 2, FEATURES: BRIDGING INPUTS, ADJUSTABLE GAIN OR ATTENUATION AND LOW IMPEDANCE OUTPUTS
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL AUDIO LINE AMPLIFIER, NUMBER OF CHANNELS: 1, POWER REQUIREMENTS: 24-30 VDC FLOATING OR 12-15 VDC BIPOLAR, CURRENT RATING: 50 MA, DIMENSIONS: (H X W X D) 1.55 X 3X .65
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL MICROPHONE PREAMPLIFIER, POWER REQUIREMENTS: 24-33 VDC, 25 MA, FEATURES: OUTPUT IS ADJUSTABLE FROM 35-65 DB GAIN. SEPARATE PHANTOM POWER SUPPLY, UP TO 48 VDC, UNIT MAY BE OPERATED WITH SUPPLY AS LOW AS 9 VDC, WITH REDUCED HEADROO
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL UNIVERSAL AUDIO ATTENUATOR, NUMBER OF CHANNELS: 2, APPLICATIONS: CONVERT 8 OHM, 25 V OR 70 V SPEAKER OUTPUT TO 600 OHM INPUT, FEATURES: UTILIZES DUAL 15 TURN POTENTIOMETERS FOR PRECISE, INDEPENDENT ADJUSTMENT OF EACH CHANNEL
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL BRIDGING INPUT TRANSFORMER, FREQUENCY RESPONSE: 20 HZ-20 KHZ, THD: .05 %, INPUT IMPEDANCE: 10 KOHM, FEATURES: ADD TRANSFORMER ISOLATION TO ANY LINE LEVEL INPUT, PROVIDES BALANCED INPUT AND OUTPUT
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL ADJUSTABLE LINE TRANSFORMER, FREQUENCY RESPONSE: 20 HZ-20 KHZ, THD: .05 %, INPUT IMPEDANCE: 10 KOHM OR 600 OHM, FEATURES: TRIM POT ATTENUATION ADJUSTS OUTPUT FROM 4-2 DB BELOW INPUT, PASSIVE DEVICE REQUIRES NO POWER
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL LINE MATCHING TRANSFORMER, FREQUENCY RESPONSE: 20 HZ-20 KHZ, THD: .05 %, IMPEDANCE: 600 OHM, FEATURES: DUAL OUTPUTS, UNBALANCED LINE LEVEL AND BALANCED MIC LEVEL, PASSIVE DEVICE REQUIRES NO POWER
Manufacturer:
RADIO DESIGN LABS
Datasheet: