DF1E-2EP-2.5C Hirose Electric Co Ltd, DF1E-2EP-2.5C Datasheet - Page 16

• Manufacturer Part Number: DF1E-2EP-2.5C
• Description: CONN PLUG HOUSING 2POS 2.5MM
• Manufacturer: Hirose Electric Co Ltd
• Series: DF1Er

Specifications of DF1E-2EP-2.5C

• Pitch: 0.098" (2.50mm)
• Number Of Rows: 1
• Connector Type: Plug
• Contact Type: Male Pin
• Number Of Positions: 2
• Mounting Type: Panel Mount, Snap-In
• Contact Termination: Crimp
• Fastening Type: Latch Holder
• Color: White
• Note: Contacts Not Provided
• Product Type: Plugs - Housings
• Contact Gender: Pin (Male)
• Number Of Positions / Contacts: 2
• Mounting Style: Free Hanging
• Mounting Angle: Vertical
• Latching Type: Latched
• Termination Style: Crimp
• Wire Gauge Range: 20-30
• Housing Material: Polyamide
• Wire Size (awg): 20-30
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Row Spacing: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: *DF1E-2EP-2.5C; H3745

BPrecautions
1. Recommended Soldering Condition
2. Cleaning Condition
3. Connection Condition
4. Cautions
5. Precautions
● In some method for laying the cable within equipment, a tension may be applied to the
● Incomplete insertion of the contact can be prevented by mounting a retainer; however,
● If the potting process is implemented, it is desirable to fill the connector with resin,
● The color phase of this product may be slightly different from that of the forming product
Flow: 260ç for 10 seconds
Refer to Nylon Connector Use Hand book.
Refer to Nylon Connector Use Hand book.
● To remove the connector, if the connector is forcedly removed, it will cause connector
Refer to Nylon Connector Use Hand book.
Manual soldering: 300ç for 3 seconds
However, if the connector is cleaned by the potting header, the detergent remains within the
connector, which will cause malfunction.
cable so as to remove the contact. In this case, it is recommended to use the retainer.
mounting of a retainer might not be possible when the contact protrudes beyond the
socket. Insert the contact securely and then mount the retainer.
considering the resin surface tensile force.
according to the manufacturing lot and future storage conditions, however the difference
doesn't affect the performance.
damage. If the connector is hardly removed, slightly push the connector once, and then
remove it using the lock.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
B161