5003-001S REDINGTON COUNTERS, 5003-001S Datasheet - Page 2

• Manufacturer Part Number: 5003-001S
• Description: GASKET
• Manufacturer: REDINGTON COUNTERS

Dimensions
Operating Instructions
MOUNTING:
NOTES:
All resettable hour meters can be reset by a pulse with a minimum duration of 6 milliseconds.
SPECIAL WIRING OPTION
OPTIONAL INPUTS:
Applications
INPUT
INPUT
Optional control circuity (such as transistors) may be used as inputs provided that such circuitry provides the required parameters of the model used.
WIRING:
INPUT
There is an internal connection between pin 3 and pin 5, a single wire can be used by connecting it to either pin 3 or pin 5. This option does not apply
for units with input of 20 - 250VAC/VDC or manual reset enable.
1.92 [48.8]
AC/DC
Model 53
+DC
Medical Equipment
SWITCH (non-voltage)
20 - 250VAC/VDC
TERMINAL BLOCK
(Pin 1 is not used)
(Pin 1 is not used)
(Pin 1 is not used)
1 2
1 2 3 4 5
3 - 30 VDC
1 2 3 4 5
0.10 [2.5]
1.02 [25.9]
3 4 5
Unit
AC/DC
1.47 [37.3]
+DC
1.72 [43.7]
Optional
Gasket
RESET
RESET
www.redingtoncounters.com
RESET
Panel
0.86 [21.8]
Test Equipment
Electronic
Clip
Color code for the 8” [203mm] lead wires (24AWG) are:
Terminal block will accept wire sizes from 14 to 24AWG.
3 - 30VDC units are protected for transient voltages up to 50 volts
with pulse widths of up to 1 second at a 1% duty cycle (including
reverse polarity).
The operating AC frequency range is 40 to 400Hz.
The mounting clip accommodates panel thicknesses up to 1/4”
[6.4mm].
Panel adapter plates are available in flush and 2 hole mount to fit
various panel cutouts. Consult the factory for availability.
1 - Yellow
2 - Blue
3 - Black
4 - Violet
5 - Gray
1.92 [48.8]
0.89 +/- 0.01
[22.6 +1/-0]
WIRE LEADS
0.10 [2.5]
1.02 [25.9]
Panel Cutout
Office Equipment
1.79 +/- 0.01
[45.5 +1/-0]
LCD Hour Meter
1.47 [37.3]
1.58 [40.0]
0.86 [21.8]
51