215R1 RF Solutions, 215R1 Datasheet - Page 7

• Manufacturer Part Number: 215R1
• Description: BOARD, OUTPUT, 8 RELAYS
• Manufacturer: RF Solutions

Specifications of 215R1

• Svhc: No SVHC (15-Dec-2010)
• Contact Current Rating: 1A
• Current Rating: 12A
• External Length / Height: 77mm
• External Width: 112mm
• Supply Voltage: 230VAC

DS200-2 Jul ‘02
Operating the 210 Rx with a ‘204 series’ transmitter.
Each 210 Rx can ‘learn’ up to 48 transmitter encoders. During the learn process the receiver learns the
encoder’s unique identity code, and the individual switch number.
This enables a single transmitter switch to operate one or more receiver outputs. This allows many different
transmitters to control one receiver output and also one transmitter button to control many 210 Rx outputs.
(The only limitation being maximum 48 transmitters to a single receiver)
To learn a Transmitter Switch to a Receiver Output;
1. Decide which switch on the Transmitter is to operate which output channel on the 210 Receiver decoder.
2. Select the 210Rx output channel by briefly pressing the 210 Rx learn switch (All LEDs flash briefly) until the
3. Operate the desired transmitter switch briefly and the channel LED on the 210Rx will extinguish.
4. Depress the transmitter switch again and the channel LED on the 210Rx will turn on briefly and then
5. The learn process is now complete and the selected transmitter switch will now control the associated
E.G. To learn buttons 1 & 2 of the 204 Tx to outputs 1 and 2 of the 210Rx.
desired channel is selected (1 thro 16). The 210 Rx LED indicates the currently selected output channel.
extinguish.
channel.
Button 1 of the 204Tx has now been successfully taught to output 1 of the 210Rx.
Button 2 of the 204Tx has now been successfully taught to output 1 of the 210Rx.
Follow this procedure to learn all buttons of the 204Tx to all outputs of the 210Rx
Depress and release the learn button S1.
All the 210Rx output LEDs flash once and LED1 will illuminate.
Depress and release Button 1 of the of the 204Tx.
Output Led1 of the 210Rx will extinguish.
Depress and release Button 1 of the 204Tx again.
Output Led1 of the 210Rx will illuminate for 1s and then extinguish.
Depress and release the learn button S1 again.
All the 210Rx output LEDs flash once and LED1 will illuminate.
Depress and release the learn button S1 again.
LED2 will now illuminate.
Depress and release Button 2 of the of the 204Tx.
Output Led2 of the 210Rx will extinguish.
Depress and release Button 2 of the 204Tx again.
Output Led2 of the 210Rx will illuminate for 1s and then extinguish.
‘DIN R
AIL
©2002 Reg. No. 227 4001, England
’ R
ADIO
R
EMOTE
C
ONTROL
Page 7