S102C 10K 0.01% Vishay, S102C 10K 0.01% Datasheet - Page 4

• Manufacturer Part Number: S102C 10K 0.01%
• Description: RESISTOR, METAL FOIL, 10KOHM 600mW, 0.01%
• Manufacturer: Vishay
• Series: S102Cr

Specifications of S102C 10K 0.01%

• Resistance: 10kohm
• Resistance Tolerance: ± 0.01%
• Power Rating: 600mW
• Voltage Rating: 300V
• Resistor Element Material: Metal Foil
• Temperature Coefficient: ± 2ppm/°C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

S Series
Vishay Foil Resistors
STANDARD OPERATIONS AND TEST
CONDITIONS
A. Standard Test Operations:
By 100 % Inspection



By Sample Inspection


B. Standard Test Conditions:



Notes
(1)
(2)
(3)
(4)
www.vishay.com
4
TABLE 4 - “S” SERIES SPECIFICATIONS
Stability
Load life at 2000 h
Load life at 10 000 h
Current Noise
High Frequency Operation
Rise time
Inductance (L)
Capacitance (C)
Voltage Coefficient
Thermal EMF
Load life R maximum can be reduced by 80 %, please contact applications engineering department.
Inductance (L) due mainly to the leads.
The resolution limit of existing test equipment (within the measurement capability of the equipment, or “essentially zero”.)
µV/°C relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor.
Short-time overload (6.25 x rated power for 5 s)
Resistance - tolerance check
Visual and mechanical
TCR
Environmental tests per table 3 on a quarterly basis to
establish performance by similarity
Lead test point: 0.5" (12.7 mm) from resistor body
Temperature: + 23 °C ± 2 °C
Relative humidity: per MIL-STD-202
(1)
(4)
(2)
For any questions, contact:
± 0.015 % (150 ppm)
± 0.005 % (50 ppm)
± 0.05 % (500 ppm)
± 0.01 % (100 ppm)
0.010 µV
1.0 ns at 1 k
0.1 µH maximum; 0.08 µH typical
1.0 pF maximum; 0.5 pF typical
< 0.1 ppm/V
0.1 µV/°C
1 µV/W
[e-mail]
IMPROVED PERFORMANCE TESTING (IPT)
The preceding information is based on product directly off
the production line. Improved performance (meaning
increased time stability with load and other stresses) is
available through factory conducted “Improved Performance
Testing”. The test routine is usually tailored to the users
stability objectives and product that has been screened can
be brought down to a potential load life of less than 50 ppm.
Various screen test routines are available and all anticipated
stresses must be taken into account before settling on one
specific
department is prepared to discuss and recommend
appropriate routines given the full spectrum of anticipated
stresses and stability requirements.
(3)
test
routine.
Maximum R at 0.3 W/+ 125 °C
Maximum R at 0.1 W/+ 70 °C
Maximum R at 0.3 W/+ 125 °C
Maximum R at 0.05 W/+ 125 °C
(RMS)/V of applied voltage (- 40 dB)
Maximum; 0.05 µV/°C typical
(Model S102C)
Our
applications
Document Number: 63001
Revision: 25-Jun-09
engineering