HSDL-3201#008 Lite-On Electronics, HSDL-3201#008 Datasheet - Page 13

• Manufacturer Part Number: HSDL-3201#008
• Description: Infrared Transceivers IR Transceiver 115.2Kb/s
• Manufacturer: Lite-On Electronics
• Type: TX/RXr

Specifications of HSDL-3201#008

• Wavelength: 875 nm, 880 nm
• Continual Data Transmission: 115.2 Kbit/s
• Transmission Distance: 30 cm
• Radiant Intensity: 9 mW/sr
• Half Intensity Angle Degrees: 30 deg to 60 deg
• Pulse Width: 2.45 us, 1.6 us
• Maximum Rise Time: 120 ns, 600 ns
• Maximum Fall Time: 80 ns, 600 ns
• Led Supply Voltage: 2.7 V to 6 V
• Operating Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 25 C
• Dimensions: 8 mm x 3 mm x 2.5 mm
• Data Rate: 115.2Kbps
• Peak Wavelength: 875/880nm
• Angle Of Half Sensitivity: 60/30°
• Communication Distance: 30
• Package Type: Ultra Small Profile
• Fall Time: 600/25ns
• Rise Time: 600/20ns
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Mounting: Surface Mount
• Pin Count: 8
• Operating Temp Range: -25C to 85C
• Operating Temperature Classification: Commercial
• Lead Free Status / Rohs Status: Compliant

Adjacent Land Keep-Out and
Solder Mask Areas
Adjacent land keep-out is the
maximum space occupied by the unit
relative to the land pattern. There
should be no other SMD components
within this area.
The minimum solder resist strip width
required to avoid solder bridging
adjacent pads is 0.2 mm.
It is recommended that two fiducial
crosses be place at mid-length of the
pads for unit alignment.
Note: Wet/Liquid Photo-Imageable
solder resist/mask is recommended.
13
SOLDER MASK
0.2
8.2
UNITS: mm
2.6
3.0