GT3020/L2C-B45562C4CB2/2T Everlight Electronics CO., LTD, GT3020/L2C-B45562C4CB2/2T Datasheet - Page 13

• Manufacturer Part Number: GT3020/L2C-B45562C4CB2/2T
• Description: Standard LED - SMD White 5000K 2000mcd 20mA
• Manufacturer: Everlight Electronics CO., LTD

Specifications of GT3020/L2C-B45562C4CB2/2T

• Illumination Color: Cool White, Warm White
• Lens Color/style: Water Clear
• Luminous Intensity: 2400 mcd
• Mounting Style: SMD/SMT
• Operating Current: 30 mA
• Color Temperature: 4500 K to 5650 K
• Lens Dimensions: 2.7 mm x 2 mm x 1.3 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Viewing Angle: 120 deg
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Technical Data Sheet
Top View LEDs
Precautions for Use
1. Over-current-proof
2. Storage
3. Soldering Condition
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60%
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
1~5 °C / Sec.
Customer must apply resistors for protection; otherwise slight voltage shift will cause big
current change (Burn out will happen).
RH or less. If unused LEDs remain, it should be stored in moisture proof packages.
storage time, baking treatment should be performed using the following conditions.
Baking treatment: 60±5℃ for 24 hours.
1~5 °C / Sec.
180~200°C
120 Sec. Max.
Pre-heating
60 Sec. Max.
Above 220°C
Prepared date: 10-May-2010
10 Sec. Max.
260°C. Max.
GT3020/X2C-BXXXXXXXXX/2T
Rev. 4
Page: 13 of 14