12-21SURC/S530-A2/TR8 Everlight Electronics CO., LTD, 12-21SURC/S530-A2/TR8 Datasheet - Page 8

• Manufacturer Part Number: 12-21SURC/S530-A2/TR8
• Description: Standard LED - SMD Hyper Red Right Angle
• Manufacturer: Everlight Electronics CO., LTD
• Type: Uni-Colorr

Specifications of 12-21SURC/S530-A2/TR8

• Mounting Style: SMD/SMT
• Package Type: Chip Led
• Emitting Color: Red
• Luminous Intensity: 47mcd
• Test Current (it): 20mA
• Forward Current: 25mA
• Dominant Wave Length: 624nm
• Viewing Angle: 120°
• Forward Voltage: 2.4V
• Product Length (mm): 3mm
• Product Height (mm): 2mm
• Product Depth (mm): 1mm
• Mounting: Surface Mount
• Peak Wavelength: 632nm
• Shape Type: Rectangular
• Chip Material: AlGaInP
• Main Category: Chip LED
• Number Of Elements: 1
• Pin Count: 3
• Operating Temperature Classification: Industrial
• Lens Type: Colorless Non Diffused
• Operating Temp Range: -40C to 85C
• Reverse Voltage: 5V
• Power Dissipation: 60mW
• Lens Dimensions: 2x1x1mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Precautions For Use
1. Over-current-proof
2. Storage
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
Everlight Electronics Co., Ltd.
Device No. : DSE-121-089
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
EVERLIGHT ELECTRONICS CO.,LTD.
Prepared date: 08-03-2004
http://www.everlight.com
12-21SURC/S530-A2/TR8
Rev.1.0
Prepared by: Kenny Wang
Page: 8 of 9