PVZ2A104A01R00 Murata, PVZ2A104A01R00 Datasheet - Page 4

• Manufacturer Part Number: PVZ2A104A01R00
• Description: Trimmer Resistors - SMD 100K OHM SMD 2MM
• Manufacturer: Murata
• Type: Trimmerr

Specifications of PVZ2A104A01R00

• Resistance: 100kohm
• Power Rating: 1/10W
• Tolerance (+ Or -): 30%
• Number Of Turns: 1Turn
• Technology: Carbon Film
• Mounting Style: Surface Mount
• Termination Style: J-Hook
• Failure Rate: Not Required
• Shaft Diameter (mm): 2.2mm
• Product Diameter (mm): Not Requiredmm
• Product Length (mm): 2.1mm
• Product Height (mm): 2mm
• Product Depth (mm): 2.7mm
• Temperature Coefficient: ±500
• Tolerance: 30 %
• Operating Temperature Range: - 25 C to + 85 C
• Element Type: Carbon
• Product: Single-Turn Trimmer Potentiometers
• Taper: Linear
• Lead Free Status / RoHS Status: Compliant

1
!Note
!Note
1. Use suitable screwdrivers that fit comfortably in
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
1. Please make sure that your product has been
2. Murata cannot guarantee trimmer potentiometer
8
PVZ2 Series Notice
Reflow Soldering Standard Profile
Notice (Handling)
driver slot. We recommend the screwdriver below.
* Recommended screwdriver for manual adjustment
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
Notice (Other)
evaluated and confirmed against your
specifications when our product is mounted to your
product.
integrity when used under conditions other than
those specified in this document.
Continued from the preceding page.
applicable solvents for cleaning. If you use any
other types of solvents, please evaluate
PVZ2A_A01=Murata P/N : KMDR090
PVZ2A_A04=Murata P/N : KMDR150
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
230
200
100
0
Pre-heating (in the air)
60-120 sec.
For reflow soldering
(Melting zone)
30 sec. max.
Soldering
Gradual Cooling
(in the air)
Time
3. Please use within the effective rotational angle.
4. When using a lock paint to fix slot position,
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
please consult with a Murata factory representative
prior to using to prevent corrosion and contact
intermittence.
performance by your product.
R50E13.pdf 04.6.11